What is the hardwood flooring installation process like?

The installation of the floor must be arranged at the end of all decorations, so as not to damage the paint surface and leave scratches in other constructions, and consumers must understand the time of floor decoration. If the consumer is not very familiar with the floor installation, then please read the installation instructions carefully, and the floor professional installer will pave the floor to ensure that the quality of the floor installation in their living room is qualified. Remind you that the floor needs to be placed horizontally, not erect or obliquely, especially when the floor has just entered the site, be sure to place the solid wood floor horizontally to ensure that it will not be damaged.

The base layer must be flat and dry, and the ground should be sprinkled with insect-proof powder during construction, and then a layer of moisture-proof cloth should be laid (the interface should be stacked 100mm on top of each other and glued with transparent glue to prevent steam from penetrating. The bedding keel must be dry and have a moisture content of less than or equal to 15%. The keel or splint is added with a layer of moisture-proof cloth to achieve double protection to prevent moisture infiltration.

It is best to use 18mm thick flooring. When paving, the floor and the surrounding walls are spaced at an interval of about 8-10cm reserved joints, and the interfaces between the floors can be fixed with special waterproof floor glue or straight nails. All floors should be paved with longitudinal dislocation when splicing.

It is recommended that after each piece of floor is spliced, tap with a mallet and wooden strip to make each piece of floor male and female tongue and tongue tight, the glue should overflow the interface, and gently shovel off the excess glue that seeps out after semi-drying, in order to ensure the environmental performance of the living room, it is recommended that consumers should choose the special glue for solid wood flooring to ensure the environmental protection and health of the entire living room.

To put it simply, first clean the ground of the home, level the ground of the master, hit the keel, lay the moisture-proof film, pre-pave the floor, pave the floor, install the baseboard strip, and finally clean it.

To put it simply: level the ground - lay the moisture-proof mat - then find the starting point of the pavement and start laying - install the baseboard.

The official and sub-official planning of the Shi Dafu Shi Dafu Shi Dafu Shi Da