What to do if the toilet drain is not smooth, the newly installed toilet drain is very slow, I don t

The newly installed poor sewer should generally be a toilet problem, and you can find a toilet manufacturer to replace one.

In this case, first check whether the sewer is unblocked, and the new pipe may be blocked; If there is no problem with the pipe, you can check whether the toilet flush parts are reasonable, and it is best to consult the manufacturer.

There are several reasons and solutions for slow draining from the toilet: 1. The drain is not smooth due to toilet structure problems. Remove the toilet bowl and lay it flat on the 10CM platform on the high ground, the toilet bowl is flushed with good water, if the water is not good, this is a structural problem, and the toilet must be replaced with a new one.

2. The toilet drain is not aligned with the sewage nozzle, which should be reinstalled to align the toilet outlet and drain outlet. 3. There are foreign bodies in the ceramic pipe of the toilet drain, which can be solved with the toilet dredger.

Answer the analysis of various reasons for poor toilet drainage: 1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools.

2. Toilet hard object blockage: accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

3. Aging and blockage of the toilet: The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

4. Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain outlet, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

5. Squatting pit to change toilet: when some old houses are built.