-
Anonymous users2024-01-24If it is a drawing issued by a formal design institute, the design load will not be less than 250 kg per square meter). This is clearly stipulated in the National Load Code.
Customized aluminum alloy sliding doors can be placed on the Xiju cat mall.
3 2 = 6 (square meters).
6 square meters = 600 square decimeters. >>>More
1. The steel bar grade is HRB335; Laying method: one end extends into the inner floor slab of the beam 500 anchorage, the anchor end 90 degree hook, the balcony outside 180 degree hook, 16 threaded steel bars 150 evenly distributed at intervals, the length of the distribution of steel bars is not subject to any force, 12 of the reined steel bars 200 are evenly distributed at intervals, and the reinforcing bars are arranged near the upper surface of the balcony slab, and the thickness of the protective layer is 25. >>>More
75 pieces, but it is recommended that you buy 76 to 77 pieces, because you are afraid that some of them will be broken during transportation, or a little worse after installation, you can use 1 or 2 pieces of cutting to improve the appearance.
The protruding pick is OK The pile is very good with 6 16 (for the consideration of adding layers in the future) Since the column is a structural column, 4 14 are on the line of the beam, and the bottom three 16 are on the top two with 14 The beam should be reinforced!