CAD to make furniture parts drawing, production method

1. Wood surface treatment: use sandpaper to polish the wood surface smoothly. If there is wood wool, it can be rubbed with cotton yarn and alcohol, and then polished with sandpaper. It should be sanded along the wood grain. >>>More

The production method of mahogany furniture is not so easy to learn, and the current division of labor is very fine. Design, material selection, drying, batching, carpentry, carving, scraping, sanding, lacquering or waxing, etc. Where to learn, you have to find a master to learn or see if some mahogany furniture factories recruit apprentices.

There are many kinds of folding furniture, the simplest is a hinge, which is placed flat with the tabletop, and the bottom of the wooden strip is rotated 90 degrees to support the plank. The complex is what kind of folding socks that can be pushed and pulled with the folding table, which is more difficult to describe, is through the bottom of a slide, there are wooden and hardware, pull out and the table flat, put it down and indent it into the table to tell the pure child, if it is hardware, it is a bit similar to the sliding door wardrobe.

The sofa cover seems simple, but there are still many things to pay attention to when making it, and cloth can be bought everywhere, but there are still some tips for making a set of sofa covers, so let's take a look.

After 3D modeling, you can do whatever you want! I'm using UG