-
Anonymous users2024-01-24The common practice is to paste wall tiles, and other hundreds of wall stickers, the pipe is usually in the corner, so the angle of the tile paste is 90 degrees, the treatment of 90 degrees is not chamfering, the corner material is wrapped in the tile cutting groove, so that the effect of sticking out is unified and beautiful, the use of other materials to hide, it is not recommended to sound insulation.
In fact, if the developer has a vent on the left side of the top of the drain, the water will not make a big sound, and the sound will be so small that it can be ignored after sticking to the tile package.
-
Anonymous users2024-01-23The general practice is to paste wall tiles, the same as other wall decorations, this pipe is generally in the corner, then the tile of this corner should be pasted to 90 degrees, the treatment of the 90-degree angle is either wrapped with rounded material to make a chamfer, or cut the tile chamfer, so that the effect is unified and beautiful, it is not recommended to hide it with other materials, about sound insulation, in fact, if the developer leaves a vent hole at the top of the drainage pipe, there will be no loud sound in the water, and the sound is very small after the tile is wrapped, which can be ignored.
-
Anonymous users2024-01-22It is also possible to use bricks + tiles, and the cost is relatively cheap and convenient, but the premise is that it should be unified with the wall bricks, otherwise it is not very beautiful. PVC and aluminum gusset are not recommended, and they are not easy to take care of after a long time.
-
Anonymous users2024-01-21Hello, you can go to the building materials store and ask, just say that the water pipe is packaged, and the boss will know what it is, and I forgot what it is called.
Are you talking about the riser, or the horizontal pipe above? If the riser is wrapped, just wrap it with PVC gusset.
The open pipe is cut off, a wire plug is installed, and it is buried in the wall
It depends on whether your bathroom has a caisson or not. If there is a caisson, all the drain pipes are laid under the caisson, and the drain main is passed through the drain pipe channel of the caisson, so we only need to change the pipes in the caisson; If it is without a caisson, one way is not enough to raise the position of the drainage pipe, and the other is to place the drainage pipe under the floor slab by passing through the floor slab to change and lay, but this is to build a house or villa to carry out, if it is a commercial house can not be done, it must be raised, and the general commercial housing is a caisson.
Yes, that's how the common plumbing in our building was repaired, but not with Coke bottles. Due to the lack of experience, it has been repaired many times, and it is "water does not leak", also called "leakage plugging". Sell cement there is.
1. Use cement bricks to build up some places with red bricks, this is the work of the bricklayer, that is, the master of the bricks, first wrap the pipe with cement bricks, and then paste tiles on the cement bricks, which can achieve the effect of integrating with the wall tiles, and can perfectly wrap the pipe, you can first wrap the pipe with soundproof cotton, and you can also fill it with styrofoam at the gap between the pipe and the gray brick to play the role of sound insulation, which is durable and durable, the disadvantage is that the gray brick is thicker, and after pasting the wall tiles, it will be much thicker than the original, and it is more bloated. It takes up a portion of space. >>>More