What is the specific content of the General Technical Conditions for Children s Furniture .

Yes, there is a standard that will be implemented in August regarding children's furniture.

However, there is no circulation on the Internet at present, which belongs to the industry.

New regulations on safety priorities.

1. The product should not have dangerous sharp edges and dangerous sharp tips, and the edges and edges should be rounded or chamfered.

2 The product should not have dangerous protrusions. If there are dangerous protrusions, they should be protected in an appropriate manner.

3. On the rigid material of the product, the diameter or gap of the hole and gap with a depth of more than 10mm should be less than 6mm or greater than or equal to 12mm; The gap between accessible moving parts should be less than 5mm or greater than or equal to 12mm.

4. Except for doors, covers, push-pull parts and their hardware, the product should not produce dangerous extrusion and shearing points under normal use loads.

5 When the product has an impermeable confined space, an unobstructed ventilation opening should be provided.

6 Except in areas above ground height or 1600mm above the height of children's standing surface, the product should not use glass parts.