What s going on with the toilet having too much water

The answer is very simple: a friend of mine is a housewife, and in order to save water, he often uses water for washing clothes or vegetables to flush the toilet; Since the toilet does not have enough water, the punch naturally decreases; However, when flushing with laundry water, his potential energy is relatively large from a kinetic point of view, and even if the amount of water is small, it can flush away the garbage in the toilet; If the water level of your toilet is not high enough, the amount of water is naturally not large enough, and the situation that you can't flush away the garbage will naturally occur; Therefore, it is recommended that you raise the water level of the toilet a little, and it will achieve the effect you want;

Answer your supplements; Toilet water level adjustment method: the twist that controls the height of the buoy is to rotate the plastic rod, twist it by hand, and it will be adjusted to the height, and it should be adjusted higher according to your situation; Some are link ropes, and if the link rope is longer, the water level will be higher; It's not particularly difficult, it's very simple, and you can do it with your hands, I hope you succeed!

It may be that the construction crew has a problem during the construction of the trap. The outlet of the trap is higher than the basin. It is best to find a construction worker to repair or rehaul the installation. You can tune it yourself. Just open the lid and turn the buoy down a bit.

If you buy it, look at the position of the water level regulator in the tank.

2. If this is not the reason, it depends on whether the water pipes in your house are blocked.

Pull the make-up pipe from the overflow pipe on the drain valve.