-
Anonymous users2024-01-24There are only two possibilities for this situation, one is caused by a wiring error, and the other is caused by a faulty switch. If you used to use it well, but now you can't turn it off, then the switch is broken. On the contrary, the contacts inside the switch are broken, and the entire switch needs to be replaced.
It is unlikely that the two lamps will break together, it is likely that the line contact problem, if the two lamps are a ballast, you can also see if it is a ballast.
How to replace a bath bomb bulb after it is broken.
1. First of all, cut off the power supply first. >>>More
Check valves are to be installed, this accessory may not be directly matched with electrical appliances, you can go directly to the hardware store or Taobao to buy, a large dozens of pieces, pay attention to the size of the caliber when buying, pay attention to the direction when installing, don't install it in reverse.
Generally, the module size of the integrated ceiling is fixed, either accounting for the size of 1 board, or 2 or 3 pieces. >>>More
The reduction area of this bath bomb is very small, and it is generally very space-saving to only square it.