-
Anonymous users2024-01-241. All because the panel is installed on the tile, so the thickness of the tile and the thickness of the cement must be considered, and the thickness of the general tile and cement must be more than 6 cm to extend the panel screws to use. Or you can measure it yourself with a ruler, rather than short.
-
Anonymous users2024-01-23Use a ruler to measure the distance from the tile surface to the bottom box plus one centimeter is the length you want, I hope it will be useful to you.
-
Anonymous users2024-01-22Go to the place where they sell it and ask them how often they sell, and they all know. 5-6cm
-
Anonymous users2024-01-21You have to find a decoration company for this kind of problem!
If the landlord does this, the wall is not easy to deal with, and the stability is not good, so if you have to do this, you must plan and deal with it.
Just find a special hole for you to open a blank one, and it won't destroy your other tiles.
Installing a switch socket requires a slot in the wall. is the first step in the renovation to do. If the tiles are already pasted, install the socket only by placing open wires on the wall.
It's hard to change unless it's reworked. If it's not too wrong, just fix it and fix the external hose.
IT IS POSSIBLE THAT THE WATERPROOF LAYER IS NOT DONE WELL, AND THE WATERPROOF LAYER SHOULD EXTEND FROM THE GROUND TO THE WALL, 250MM ABOVE THE GROUND. >>>More