The piece of porcelain that kept the water out of the squatting urinal was knocked out, and every ti

Haven't seen it. Probably not. Beg.

Hello! The best and most effective way to do this is to reinstall!

It is best to have one drain hole at the bottom of the toilet at the outlet, and now many brands have 2-3 drain holes (according to different calibers), but the more drain holes, the more it affects the punch. The water outlet of the bathroom is divided into lower drainage and horizontal drainage, and the distance between the center of the drain and the wall behind the water tank should be measured, and the toilet of the same model should be bought to "sit at the opposite distance, otherwise the toilet can not be installed." The outlet of the horizontal drain toilet should be equal to the height of the horizontal drain, preferably slightly higher, in order to ensure that the sewage is smooth, and the 30 cm toilet is the middle and lower drainage >>>More

The outlet must be lower than the inlet, otherwise the sewage will be backfilled.

Jomu double the kitchen into the wall faucet water outlet, according to the size of the faucet to choose the corresponding pliers to unscrew the faucet gland, and use the clamp to take out the worn shaft gasket, and then replace with a new gasket to solve the problem, I hope to help you, satisfied, thank you.