What kind of tool is used to punch holes and install the three in one connector screws of furnitur

Generally, punching is a row of drilling, not a furniture factory mass manufacturing do not need to buy, their own manual punching with a pistol drill plus a hole opener;

The installation is a screwdriver, a word or a cross.

First of all, add the next reply.

There is also one less wooden stick, produced.

The furniture of the product is made of the machine, if you are du do it yourself, it is a bit troublesome to the market very dao

It's hard to buy, you can buy a 3M*R rotor for black rod drilling, you can buy an 8m rotor for the middle one, you can buy a 5m rotor for the right one, and the one with a hole on the side is to put a wooden stick, and the diameter should be 5m

Excuse me, bai, are you a woodworking DIY friend?

DU is required for handcrafting

The tools used include a hand drill, a Phillips screw, and a wooden tenon, which is used to fix the hole position and prevent deflection. The drill bits that need to be used are 6mm, 8mm, 10mm, 12mm, and 8mm for wooden tenon holes. There is also an installation method that does not use a white three-in-one nylon nut, which is called a two-in-one connector, which is directly installed on the substrate with a two-in-one screw, and the effect is actually the same.

Please refer to the attached diagram for the installation method.

Generally, it is a multi-row drill BAI

into, white rubber particles du embedded parts need zhi

With a 10mm drill bit, the metal eccentric wheel lock DAO 15mm, the black connecting rod back 8mm, the wooden tenon answer 8mm, the connecting rod and the wooden tenon are horizontal holes, and the eccentric wheel lock and embedded parts are vertical. And your accessories lack wooden tenons, and furniture without wooden tenon holes is not reliable, this is true. I'm a row driller, no thanks!