-
Anonymous users2024-01-24Now there are two ways to paste tiles, one is the traditional cement river sand, and the other is the special tile adhesive to stick.
Because of the influence of factors such as tile quality, water absorption, and tile size, it is more difficult to paste ceramic tiles, so the use of special porcelain tile adhesive to bond, there will be no hollowing, cracking, falling off, etc. Compared with the traditional cement river sand, porcelain tile adhesive has the following advantages:
1.Strong adhesion force, the adhesion force is 3 times that of traditional cement river sand tiles;
2.No hollowing, no bricks, no slipping;
3.Water-resistant, moisture-proof, anti-aging;
4.It does not contain harmful volatiles such as formaldehyde and benzene, and is environmentally friendly and non-toxic;
5.The construction is simple, and it is ready to use with water, omitting the steps of wet wall, soaking brick, and supporting of traditional cement river sand tiles;
6.THIN-LAYER CONSTRUCTION, SPACE-SAVING, THE THICKNESS OF TRADITIONAL CEMENT RIVER SAND TILES IS ABOUT THAT, WHILE THE THICKNESS OF PORCELAIN IS ONLY ABOUT 5MM, WHICH GREATLY SAVES THE USE OF SPACE.
Of course, the standard construction is the guarantee of a good bonding effect, so it should be carefully treated in the allocation of materials and the thickness of scraping.
-
Anonymous users2024-01-23It will not fall off if it is durable with cement, and there must be a little bit of emptiness, which depends on the teacher.
-
Anonymous users2024-01-22Hang copper wire and paste it with tile adhesive.
It is not recommended to use vitrified tiles in the bathroom, because the unique microporous structure of vitrified tiles is its fatal flaw. Generally, after the vitrified brick is laid, the brick surface should be waxed, and polished after 3 times of waxing. After every 3 months or half a year to wax, if not waxed, then water will seep into the brick body from the micropores of the brick surface, if it is colored water, then these colors will seep into the brick surface and stay in the brick body, forming a flower brick. >>>More
Practice has proved that it is still used with 1:2 mortar plaster, and 2 mm shrinkage joints are reserved, which is more firm and more durable.
In fact, the walls of the bathroom can be painted with waterproof paint, some people have compared the waterproofness of home decoration paint to lotus leaves, dew drops will never penetrate into the lotus leaves, waterproof paint is this effect. Professionally speaking, special waterproof and breathable molecules are added to the formula of waterproof paint, which can form a dense paint film, so that water molecules cannot penetrate into it and ensure the breathing function of the wall. In the market, Nippon, Fenlin, Xijia, Dragon, Xiaoyun, Dufang, Asahi and other brands of home decoration coatings have good waterproof performance, among which Nippon Paint and Fenlin are the most well-known. >>>More
Kitchen tiles are easy to clean up in the future, no problem without tiles. But the bathroom is definitely not good, Bi Qingfu has been in a humid environment for a long time, and the paint will peel off when it gets wet! It is not waterproof, and if there is water seepage on the wall of the stove, the next room will be moldy! >>>More
Yes, yes, but dirty and not easy to clean.