-
Anonymous users2024-01-24The screws of the solid wood hole will crack because the hardness of the solid wood is too hard.
The correct way to do this is:
Before screwing, use a carpentry drill to make a small hole in the solid wood, the size of the drill bit is slightly smaller than the size of the screw, and then screw the screws to prevent the wood from cracking.
I don't know if LZ missed the best remedy period, then you should withdraw the screws, and then add a little 502 fast glue to the broken part, be careful not to get the paint, put a flat wooden board on it at speed, hit it with an iron hammer, and paint a little similar to the original thing. >>>More
There's no way, only to disassemble and reinstall, your toilet called edging, that's it, I'm professional.
You can change to a thicker self-tapping screw, but this will not last too long, a year or two. At that time, it will be removed and re-punched in another place, tapped, and the handle should cover both the new hole and the old hole, which will also work. (Drill bit + wire tapping is less than 10 yuan in total).
You can drill the hole but you can't tighten the screws, and if you pull it with a cap puller, it will be very firm, and the effect is the same as screwing.
The main thing is that it is not easy to start and not easy to focus. If it doesn't work, take it off by sabotage.