-
Anonymous users2024-01-24The cracks may be caused by walking water and electricity, suspended ceilings, and drying cement after plastering, or there is no strong tape on it It is recommended to find a decoration company to paste the cloth and brush it again.
2 You can also try to use imported water-based silicone to fill the cracks, and then replace it with latex paint, basically no need to stick. The price of silicone cannot be less than 30 yuan!
-
Anonymous users2024-01-23In order to ensure that there are no cracks in the wall ceiling, scrape 6-8mm with coarse leveling, add a layer of 80 grams of mesh cloth in the middle, and then batch the inner wall mildew and water-resistant soil. This is the lowest cost.
-
Anonymous users2024-01-22If the cracks in the walls are due to construction problems, then it is useless to repair them.
If the crack between the ceiling and the wall is caused by the difference in the expansion coefficient of the two materials, the expansion coefficient of thermal expansion and contraction. It is recommended to paste with white latex + kraft paper, then scrape putty, and brush latex paint to solve your problem. Generally, the decoration of the house has to go through a winter and summer, and the cracks are cracked, and then repaired, so that there will be no more cracks.
If the time is short, it will crack even if it is mended.
1. At the joint between gypsum board and gypsum board, the double-layer gypsum board process is used to make the gap of gypsum board on the gypsum board, and then fill it with caulking gypsum, so that the thermal expansion and contraction coefficient of the same material is close, and then paste it with caulking tape to avoid cracking at the joint. >>>More
Gypsum board for the ceiling after a long period of use, it will definitely crack, because one of the characteristics of gypsum board is the expansion and contraction after being damp and dry, so the joint is easy to crack. The gypsum board itself has a paper surface, that is, the paper gypsum board, which reduces the deformation, and then, the gypsum board joint must be pasted with anti-cracking paper to prevent cracking, and the use of calcium silicate board and other improved panels.
1.Cement selection with low heat of hydration such as slag Portland cement. >>>More
Whether the ventilation and lighting of the house are good is one of the important reasons for judging the orientation of the house and the quality of the house type. The room should give people a bright feeling, if the original type of lighting is insufficient, then the decoration must be made up for with artificial lights, the dim home space for a long time is easy to make people depressed, and even produce bad psychological emotions. If this is the case, it is best to compensate for this by hiding fluorescent lamps in the wooden grooves on the four sides of the ceiling in the living room. >>>More
Generally, the height of commercial housing is different from your home, and the height of all the roofs is enough, which will look very depressing. The ceiling is beautiful enough, it is recommended that you hang the shape around the living room, leave the middle part of the ceiling, and install a chandelier.