-
Anonymous users2024-01-24If it is a gusset, remove the edge and press the strip first.
If it's a block. You can remove it by pushing it up.
-
Anonymous users2024-01-23The integrated ceiling is directly used with a utility knife to pick up a corner. Of course, it is best to use a suction cup.
The stainless lampshade is fixed to the ceiling hole by two symmetrical springs on the ring side, without screws. Carefully pull the ring down with your hand, and feel the spring tension, and you can see the effort when you pull it out a little.
This thing won't be big, as long as it's not blocked, you don't need to take it.
First, take out the blade and insert it into the gap at the edge of the ceiling panel, as shown in the figure below >>>More
The ceiling of the bathroom is generally an aluminum gusset ceiling, and there are two ways to disassemble it, one is to use a suction cup to suck, and the other is to pry with a knife, as follows: >>>More
The barrel is big, how much bigger, if it's one or two centimeters, then put the door down, put it in, and then put the door in again. Ordinary people do not have the technology to refill dismantled wooden barrels. When it is dismantled, it is a pile of useless wood, and it becomes burning material.