-
Anonymous users2024-01-241. Is the fully integrated ceiling lamp broken to be replaced? If it's broken, just change the light source inside, it's convenient and cheap, if it's not good-looking to change the whole lamp, you have to find a team, you can't change it, I used to do LED, this kind of thing light source is very cheap, and manufacturers also have supporting it.
Suction on the panel with a suction cup to come down, if the merchant does not give you a suction cup when installing it, then you can also use the suction cup hook, usually suck the glass hanging things that suck, or use a utility knife in the gap between the lamp and the board to get it down, that is, the utility knife is afraid of damaging the panel, if the lamp is broken, change the lamp, it is very convenient to disassemble and assemble.
Suck it down with a small suction cup, it's convenient, it's simple, and you will.
You don't have to worry about this, you can go to your door to see if there is a store that makes hardware, and the general boss will come to your door to change it for you, and the price should be dozens of yuan.
Check whether the metal sheet in the lamp center is displaced, check whether the ballast is broken if there is a ballast, check whether the wiring is loose on the terminal on the bath bomb, and whether the wiring in the panel switch is loose, pay attention to turn off the power during operation to prevent the problem from occurring.
The stainless lampshade is fixed to the ceiling hole by two symmetrical springs on the ring side, without screws. Carefully pull the ring down with your hand, and feel the spring tension, and you can see the effort when you pull it out a little.