The floodgates in the kitchen and bathroom of my new home are always jumping. There are no electrica

Updated on Kitchen 2024-06-19
6 answers
  1. Anonymous users2024-01-24

    There are two possibilities: one is the empty open is broken, you can change one to try, the general distribution box has a spare, that is, there is no wiring below, try to know, the other may be a short circuit, this kind of thing is more common, the switch is turned off and tripped, indicating that it is not the problem of the lamp head, then it should be a problem with the socket, to check one by one, it is best to find an electrician, the property can also.

  2. Anonymous users2024-01-23

    Is your gate a leakage protector? If it is, it can't be pushed, it means that there is a leakage, and the wiring in the kitchen and bathroom is the most likely place to leak.

  3. Anonymous users2024-01-22

    1) There is leakage or short circuit, focus on checking the electrical appliances and wiring in the kitchen and bathroom, the electrical appliances should not only turn off the switch, but also unplug them one by one to eliminate, and the wiring problem should be operated by an electrician.

    2) The problem with the switch itself.

  4. Anonymous users2024-01-21

    It is best to ask a professional electrician to solve it, it may be a switch problem, and a single P may not jump, it is estimated that the wiring of the bathroom is damp, or the wire is small, and the switch is also possible, please master.

  5. Anonymous users2024-01-20

    First: the line is broken, check the plug-in.

    Second: the brake is broken.

  6. Anonymous users2024-01-19

    : 100% line leakage.

    Solution: line replacement and transformation.

Related questions
1 answers2024-06-19

It is fully proved that there is a short circuit and leakage phenomenon in the circuit controlled by the toilet gate. Get a professional electrician to check it out on site!

2 answers2024-06-19

Check the interfaces of the bath bomb line to see if there is coking and poor contact; Replace the empty opening of the bathroom: first, the sensitivity is not good, and then the load does not match the empty opening.

5 answers2024-06-19

The sequelae left by your home when decorating should be that there are wire joints in the wall (which is not allowed), but in fact, many people ignore such problems. >>>More

3 answers2024-06-19

You connect an air switch to two wires, this method itself is not good, now there is a problem with one (room), even the other road (hall), the problem of the road (room) wire itself will not be short-circuited, you just need to check whether there is a problem with all the sockets on this line (room), if there is no problem, then check the connection of the line.

4 answers2024-06-19

First of all, there must be a problem of short leakage, you should be on the line of your bathroom, find an electrician to check it in detail, and the second is that the leakage protection switch of your home has far exceeded the capacity of the floor and the whole building, so your home will not jump, according to the normal configuration should be your home jumped first.