Lathe tailstock plate tooth sleeve processing

1 answers

Anonymous users2024-01-24

1. The full taper is determined according to the taper hole of the tailstock sleeve. 6140 is Mohs 5 and 6132 is Mohs 4.

Related questions

How is the inner hole of the tailstock of the 6263 lathe processed

3 answers2024-06-25

After the tailstock is processed, the inner hole of the tailstock can be processed with a special boring bar on the equipped lathe, which can be concentric with the spindle.

In order for the lathe tailstock sleeve to work properly, what needs to be used for circumferential

1 answers2024-06-25

Barrel hole Morse taper positioning drill bits and all kinds of tools with Morse taper. The cylinder positioning key and the keyway positioning screw rod drive the nut to move in an axial linear line along the keyway, and the nut is fixed with the lathe tailstock sleeve, so the lathe tailstock sleeve can move axially.

Where to buy a multi-head drill seat for the tailstock of the lathe, which is installed on the tails

3 answers2024-06-25

This thing is called a drill chuck, and it is sold in stores that sell tools or machine tool spare parts stores.

The top of the tailstock of the lathe resists the processing of the workpiece, and the processing of

5 answers2024-06-25

There are many reasons for the top of the tailstock of the lathe to resist the machined parts for the processing of the vibrator, mainly in the following aspects: >>>More

How to solve the reaming hole of the tailstock of ordinary lathes and the insufficient length of the

3 answers2024-06-25

Hello! There are sold ones, elongated sockets, and reamers are also long. >>>More