How to modify the decoration bedroom bed head with upper beam

Updated on Bedside 2024-06-21
3 answers
  1. Anonymous users2024-01-24

    Now the height of the custom I wooden door including the door should not exceed the meter, if the door opening of the house is too high, there are two solutions, one, the custom larger door, due to the manufacturer's over-size production, the cost will increase a lot, two, the door beam, is to use a large core board, gypsum board, etc. will be above the door opening, the oversized door hole will be sealed part, become the standard size of the door opening, the relative cost is lower, but the door hole part is easy to crack due to the door often open and close.

    Hope it helps.

  2. Anonymous users2024-01-23

    There are many options, you can wrap the column with a panel! It can also be used as a bedside background wall!

  3. Anonymous users2024-01-22

    Make an artistic modeling, top a background wall.

Related questions
5 answers2024-06-21

Points and tips for the installation of the set door.

1.Check whether the size of the hole meets the requirements of the lead before the installation hand, and if it does not meet the requirements, it should be treated as necessary. 2. >>>More

2 answers2024-06-21

This is called a dual-control switch circuit, and two circuits are required between the two switches. The zero wire is directly connected to the lamp head, and the live wire is connected to the first switch, and from the other switch to the lamp head, look at the picture.

1 answers2024-06-21

Design renderings of small dining room booths: accustomed to the square design, the arc-shaped booth seems to be refreshing, the fresh floral curtains are matched with the warm beige booth sofa, and the home is pleasant and cool.

3 answers2024-06-21

It is easy to make a pass, and there is a room like this. There are many bars, tatami mats.

4 answers2024-06-21

If you want to increase the bathroom, you need to do the sewer, the diameter of the sewer pipe is thicker, and there needs to be a certain slope (generally 5 degrees), which needs to raise the ground to solve this problem, generally it should be at 150MM, and then punch holes in the wall from the low end, and the pipe can enter the bathroom, but the added toilet can only take a bath at most to solve the problem of urine, and the stool can not be solved.