Cleaning method of toilet water storage tank

1. The first step is to open the package of the toilet cleaner, so that the detergent in the box can fully penetrate out, so that the water tank can be washed more cleanly.

>2. In the second step, pay attention to pulling out the small plug located above the detergent, and the plug cleaner cannot come out of the box without pulling it out.

>3. The third step is to open the water storage tank of the toilet and put the detergent vertically into it, so that it is easier to play its role in cracking the first bridge.

>4. The fourth step is to fill the water tank with 8 points of water, and then please do not use the water in the tank to flush the toilet during this period, only need to wait for ten minutes to complete the cleaning.

【Zhedong Container】It is recommended that you clean plastic water tanks, water towers, plastic storage tanks, water storage tanks and other containers once or twice a year, dilute them in a ratio of 1:200 with 84 disinfectant, and then soak the entire water storage tank in the mixed disinfectant solution, soak it for more than two hours, and then rinse it with water, which is the treatment of the dirt on the surface of the plastic water tank.

1. Close the water inlet valve, open the sewage outlet valve, and drain the water in the water tank;

2. Clean the perimeter and bottom of the water tank with a clean rag. If the bottom is seriously dirty, it can be scrubbed with a soft towel and detergent;

4. Open the water inlet valve, put an appropriate amount of water to rinse the wall and bottom of the barrel, so that the dirt is discharged from the sewage outlet, and it can be repeated many times if necessary until it is satisfied;

5. Close the drain valve, open the water inlet valve, let the water tank be refilled with water, and the cleaning work is over.

There are descalers sold on the market, and there are also ones sold on Taobao. Soak it, rinse it with water, sterilize and remove stains.