-
Anonymous users2024-01-24It must be flush or not affect the aesthetics.
-
Anonymous users2024-01-23There are two kinds of air intake, one is the lower return air and the other is the rear return air. After the return air to do the return air box, to glue, to canvas, composite board, screws, the canvas to the air outlet, the air outlet and the return air outlet to be decorated in the ceiling opening, and then it is customized tuyere, measure the size of the custom. When the decoration is completed, install the tuyere.
You can install the air outlet into the round ceiling, but the panel of the exhaust outlet should be customized into an arc type (that is, the arc is the same as your ceiling), and the pipe inside the air outlet can be consulted with your local air conditioner person, they have a way and can explain it to you clearly.
As long as it is installed properly, the suspended ceiling and no suspended ceiling will not affect the cooling effect.
According to the figure, make a shape of the same width on the wall corresponding to the low air duct ceiling position, and then make three horizontal lines with the wall between the door, and make gypsum board for the material. In the later finish, you can use latex paint to do color jumping treatment with the wall. Or it is very individualistic to paste gray mirrors on the wall modeling.
There is no problem, it can be remotely controlled.
It will not be affected, the duct machine can adjust the wind speed and the directivity of the tuyere.