-
Anonymous users2024-01-24The toilet is of the rear type, and the lower row type cannot be used.
It is no problem to install the washbasin directly with a water seal, otherwise install a P-bend on the side drain.
As long as the shower room has a water seal, it can be installed directly, otherwise a P-bend should be installed on the side drain pipe.
The floor drain is generally omitted, and it is usually careful not to let the ground have stagnant water.
Washing machines, mop sinks, etc. can be referred to the shower room.
It should be noted that the washing machine cannot choose gravity self-draining, but many washing machines now use a micro built-in drain pump for drainage, so it is okay to reserve the drain above the ground.
-
Anonymous users2024-01-23It is more troublesome to install a bathroom with side drainage. Because the height of the side drain directly affects the installation of the bathroom. Can you write down the height of the side drain so that you can give you advice!
-
Anonymous users2024-01-22As long as you choose the right product, there is no problem, the general European national pipeline is this design, Huida products are exported to many countries in Europe, there are such products, you can go to the Huida bathroom store to choose.
In modern home decoration, the bathroom is not only a place to wash off the dust, but also a place to relax the nerves and rejuvenate the floor. Therefore, instead of thinking of the bathroom as the most unclean part of the room, as in the past, it should be carefully planned. Today I will tell you how to install the bathroom drain. >>>More
Plumbing bricklayers will install it, in fact, they will install it themselves. You start by buying a smaller alloy steel hole opener and attaching it to the hand drill. Then make a small hole and open the tile. >>>More
Generally about 20cm away from the wall, specific steps:
1. Installation Environment: >>>More
Be sure to do a good job of drainage. 1. The water pipe is a hidden project, and the size of the water pipe must be considered more comprehensively when arranging the size of the water pipe, or it is not easy to use in the later stage, and it is more troublesome to maintain. Toilet drain pipe size: The inner diameter of the sewer pipe is 100mm to 3000mm, and the length is 30mm to 200mm. >>>More
1.Make a hole in the floor slab.
2.Before the installation of the drainage pipeline, the civil engineering negotiation shall be required to pay off, find the size and height of the rejection of sanitary appliances, install it in turn from the main pipe, riser pipe to the branch pipe, and verify whether the coordinates are accurate again before the civil engineering plugs the floor hole. >>>More