A house that was renovated 6 years ago now leaks to the downstairs and opens the floor of the kitche

1) Pipeline leakage Pipeline leakage refers to the leakage caused by defects such as damage to the upper and lower water pipes, floor drains and toilet interfaces

Leakage of water pipe: The manifestation of this situation is that the leakage is continuous and uninterrupted, and sometimes the leakage volume also has a continuous increase phenomenon, such as closing the main valve of the water pipe, the leakage will be reduced immediately.

Sewer leakage: first observe the leakage amount, and make a record, then open all the faucets, toilets to flush multiple times and pour water into the floor drain, if the leakage increases, it means that the pipe is damaged and leaking.

2) Surface leakage: There are two ways to identify surface leakage:

Leakage occurs only under conditions such as bathing and mopping, that is, when water is drenched or accumulated on the ground and wall, and in this case, it can be determined as surface leakage.

Use the method of inspection and identification of pipeline leakage to carry out inspection, if it is judged that it is not pipeline leakage, it is surface leakage.

If the bathroom is leaking from the waterproofing layer, not from the upper and lower sewer pipes. They can be repaired without planing tiles. The maintenance method is very simple, which is to use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom, so that the water does not enter the ground and flows directly from the waterway.

If it's a problem with the upper and lower water pipes. And if the water pipes are underground, you need to consider planing tiles, but you don't have to redecorate the bathroom. For example, if the inlet pipe is leaking, the pipe can be changed to avoid the leaking water pipe.

If it is a leak in the sewer pipe, it is also necessary to find the specific location of the leakage, and according to the situation, it is determined that it is partially planed bricks to solve, and it is not necessary to plane all of them.

Here's how to solve the problem:

Repair method of leakage water on the floor of the bathroom (Note: As long as the water pipe is not broken, you can ensure that the problem of water seepage on the floor can be solved with this method):

1) Treat the dust, oil, and stagnant water on the surface, and keep the surface dry.

2) If the tile joint is filled with caulk, you need to cut a small groove with a knife.

3) Spray penetrating waterproofing agent on tile surface, tile joint, wall joint, pipe root and other cement parts, and be sure to spray evenly.

4) After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints and damaged and defective parts with caulk, and the weak links around the pipe root are reinforced.

5) The connection between the ground and the wall and the pipe root are made of plastic steel mud as a waterproof edge.

6) After the waterproof construction is completed, the construction site can not be drenched within 24 hours.