What is the cause of the deformation of the solid wood floor at home

Updated on Solid wood 2024-06-14
7 answers
  1. Anonymous users2024-01-24

    Generally speaking, the phenomenon that occurs more in use is that the floor is tiled or arched, which is caused by the moisture of the floor, and the reasons for the moisture of the floor are roughly as follows: (1) Moisture in the air (such as Huangmeitian). 2) The floor is not dry, and the keel is reinforced with cement.

    (3) Keel, the raw floor is too wet. (4) Use water-based glue. (5) The first floor and other humid environments are not specially treated with moisture.

    (6) The section where the stone floor meets the floor is not closed. (7) Blisters (such as ruptured water pipes, balcony water backfilling, etc.). In addition, improper construction of the product itself and construction will also cause arching.

    For example, improper drying treatment, insufficient health care, too low moisture content, too shallow back groove, insufficient expansion gap in construction, too tight laying, etc.

  2. Anonymous users2024-01-23

    Generally speaking, the phenomenon that occurs more in the use of solid wood flooring is that the floor is tiled or arched, which is caused by the moisture of the floor, and the reasons for the moisture of the floor are roughly as follows:

    1) Keel, the raw floor is too wet.

    2) The floor is not dry, and the keel is reinforced with cement.

    3) Blisters (such as ruptured water pipes, balcony water backfilling, etc.).

    (4) Use water-based glue.

    5) Moisture in the air (e.g. Huangmeitian).

    (6) The section where the stone floor meets the floor is not closed.

    7) The first floor and other humid environments are not specially treated with moisture.

    In addition, the solid wood floor itself and improper construction can also cause arching. For example, improper drying treatment, too low moisture content, insufficient health care, too shallow back groove, insufficient expansion joints in construction, and too tight laying.

  3. Anonymous users2024-01-22

    1: The quality is not good, the wood is not dry.

    2: The floor is damp.

    3: When laying the floor, the expansion and contraction are not left well.

  4. Anonymous users2024-01-21

    Hardwood floors are water-invisible!

  5. Anonymous users2024-01-20

    The floor is damp.

    The inconsistency between the external air humidity and the humidity of the floor itself leads to deformation!

  6. Anonymous users2024-01-19

    Most of the sports floors are made of natural solid wood, and after the solid wood wood is damp, there will be bulging and deformation, and the deformation of the wooden floor will be alleviated after the air humidity in the museum returns to the normal range. If the wood floor is too swollen and deformed, it needs to be repaired or replaced. Small deformations can be repaired simply, and large deformations need to be polished, refurbished or reinstalled.

    The deformation of the sports wood floor is better than the rescue. Then we should pay attention to the maintenance of the wooden floor, for the water stains that accidentally spilled on the surface of the sports wooden floor, we should remove it in time, avoid the items with poor air permeability covering the surface of the sports wooden floor, regularly check the airtightness of the doors and windows, prevent the rainwater seeping out of the doors and windows in rainy days from flowing on the sports wooden floor, and regularly check the plumbing facilities in the basketball hall to prevent the pipeline from leaking and soaking the sports wooden floor.

  7. Anonymous users2024-01-18

    Absorb water and be damp, 9 out of 10 solid wood floors are caused by moisture.

Related questions
5 answers2024-06-14

The hardwood floor is deformed, with tile bends and arching. >>>More

12 answers2024-06-14

If the surface of the solid wood floor is cracked, it is a problem with the quality of the floor. If the seam is enlarged, it is caused by dry room and high room temperature. If the indoor humidity is increased and the heating season has passed, the gap will be displayed.

4 answers2024-06-14

The material used to make the wooden door is not dried thoroughly or the moisture content is not up to standard. >>>More

3 answers2024-06-14

Solid wood flooring is characterized by "wet and dry contraction". >>>More

1 answers2024-06-14

Generally speaking, the phenomenon that occurs more in use is that the floor is tiled or arched, which is caused by the moisture of the floor, and the reasons for the moisture of the floor are roughly as follows: >>>More