The waterproofing of the wall of the bathroom shower area must be 1800mm high, which specification i

Updated on Bathroom 2024-06-03
4 answers
  1. Anonymous users2024-01-24

    Code for Construction of Residential Decoration and Decoration Engineering GB 50327-2001 Construction Points.

    The surface of the base should be smooth, and there should be no looseness, hollowing, sanding, cracking and other defects, and the moisture content should meet the construction requirements of waterproof materials.

    Floor drains, casings, sanitary ware roots, yin and yang corners and other parts should be made with a waterproof additional layer first.

    The waterproof layer should extend from the ground to the wall, 100mm above the ground; The waterproof layer of the bathroom wall shall not be less than 1800mm.

  2. Anonymous users2024-01-23

    Don't you want to do it? In that case, you will be responsible for the consequences. Why this height?

    The first is because of the upstairs rule, and the second is because the man is 1.78 meters tall. Then how much is the height of the shower head, you should be able to feel, when you take a bath, the shower head is not so much taller than you, whether the water is going to splash out when you take a bath, it may be spilled on the wall, over time, if you don't do such a high waterproof, your wall will be broken later, and then the loss is you. Waterproofing can also not be done, but if you don't drain the later stage after you live for a few years, the walls will seep water.

  3. Anonymous users2024-01-22

    There are no rules, it is better to prevent them. If you are troublesome, you can search for Bangming waterproofing agent directly on Taobao. Spray it directly on the wall, save trouble!

  4. Anonymous users2024-01-21

    Code for Construction of Residential Decoration and Decoration Engineering GB 50327-2001 Construction Points.

    The surface of the base should be smooth, and there should be no looseness, hollowing, sand, cracking and other defects, and the moisture content should meet the construction requirements of waterproof and demolition materials.

    Floor drains, casings, sanitary ware roots, yin and yang corners and other parts should be made of waterproof additional layer pants first.

    The waterproof layer should extend from the ground to the wall to prevent hunger, 100mm above the ground; The waterproof layer of the bathroom wall shall not be less than 1800mm.

Related questions
How high is the waterproofing of the bathroom wall?
22 answers2024-06-03

The waterproofing of the bathroom wall is 50 centimeters, 1 meter, 1.8 meters, etc., according to the needs of the bathroom.

The bathroom wall waterproofing is at least as high as possible
2 answers2024-06-03

The higher the better, the shower area should not be less than a meter (according to the height of your own members), and the others should not be less than 50 cm, and the wash basin should also be appropriately heightened.

I am not there in the bathroom to do waterproofing, and after the wall waterproofing is done, the wa
1 answers2024-06-03

In this case, there is a greater chance of water seepage! >>>More

Is it okay to make waterproof polyurethane waterproof material for the wall of the bathroom?
2 answers2024-06-03

Polyurethane waterproof coating for toilet waterproofing is OK in terms of waterproof effect. However, polyurethane waterproof coating is an oil-based waterproof coating, and its environmental performance is not very good, so it is generally not recommended to use it for bathroom waterproofing. Of course, the waterproof under the bathroom caisson can be used, after all, it will be buried deeper. >>>More

Does the bathroom waterproofing have to be dug to the bottom to do it?
5 answers2024-06-03

The waterproofing manufacturing method:

The toilet space of ordinary residential buildings is narrow, and there are pipelines passing through the floor slab, so the coating is commonly used for waterproofing and the membrane is rarely used for waterproofing. >>>More