Water saving flush toilet which button is half a bucket of water

Updated on Toilet 2024-06-21
1 answers
  1. Anonymous users2024-01-24

    1. When all the water is flushed, the water must be ventilated into the sewage pipe, that is, one in and one out, but when the air is only in and out of the water, it will cause the water to flow very slowly in the seat, either the air hole of the sewage pipe on the floor is blocked, or the master has changed the underground sewage pipe when making the pipe.

    As long as the toilet is removed and something is put on it, and then the water in the tank is filled with water to try to flush, if the flushing strength is good, it means that the gas of the sewage pipe only enters and does not come out, and if the flushing is not good, it is the problem of the toilet. At present, the more convenient solution is to install the toilet bowl should not be too well sealed, and a small hole should be left, such as cutting a small piece on the sealing ring.

Related questions
5 answers2024-06-21

The main source of the odor in the bathroom comes from the flush toilet and floor drain, so it is necessary to clean the toilet itself, in addition to cleaning the toilet from time to time, it is best to place some toilet cleaners in the flush tank, so that it is equivalent to cleaning it when flushing the water at ordinary times. >>>More

1 answers2024-06-21

Flush toilets are more common in life, and barrier-free toilets in families and public toilets are inseparable from flush toilets, which are very convenient to use, and this convenience is all brought by flush toilet tanks. >>>More

3 answers2024-06-21

There are too many, about 80 toilets are very good, and now the competition in the toilet industry is fierce, and some toilets are 20 years of warranty and 100 years warranty.

1 answers2024-06-21

You can get the dealer back, and the dealer should be able to help you find the tank cap.

8 answers2024-06-21

1. Open the main valve to determine whether there is tap water. >>>More