Which is better, solid wood multi layer board or solid parquet

Three-layer wood composite is more wear-resistant, parquet flooring is relatively inexpensive and easy to install.

1. Multi-layer solid wood flooring: It is made of multi-layer board as the base material, selecting high-quality precious wood as the panel, and making it through high temperature and high pressure in the hot press machine after being coated with resin glue. It is not easy to deform and crack, the dry shrinkage and expansion system is very small, and it has a good ability to adjust indoor temperature and humidity.

2. Three-layer parquet: It is a three-layer structure of solid wood parquet with solid wood panels or veneers as the panel, solid wood panels as the core layer, and veneer as the bottom layer.

1.If you need to look at laminate flooring first, and you feel uncomfortable, you are not interested in the option. Generally, qualified products are divided into three grades:

First-class products and excellent products, appearance quality is an important criterion. The color of the solid wood floor should be smooth and free of obvious defects such as cracks, mold, wormholes, and the texture of the surface layer of the wood. The surrounding mortise groove should also be smooth.

2.Hardwood flooring is a natural decorative material, you can take about 10 layers of flooring from the box when you buy it and attach them to a flat floor by hand. At this point, you can check if the articulation connection fits the interface and if there is a difference in thickness between the two plates.

This is the accuracy of observation. Observe the cross-section of the floor to see if the texture is messy, and then check for cracks, dead knots, and other defects. In addition, hardwood flooring is a natural product, so there is obviously a color difference, so you don't need to be careful.

Solid wood multi-layer flooring: It is made of criss-crossed multi-layer boards as the base material, high-quality precious wood as the panel, and then coated with resin glue and made by high temperature and high pressure in the hot press. It is not easy to deform and crack, the dry shrinkage and expansion system is very small, it has a good ability to adjust the indoor temperature and humidity, the surface layer can show the natural wood grain of wood, the paving is simple, and the use range is wider.

The price is higher than laminate flooring and lower than solid wood flooring. Suitable for installation in geothermal heating rooms.

Solid wood parquet: It is made of staggered lamination of boards of different tree species, which overcomes the shortcomings of wet expansion and dry contraction of solid wood floor to a certain extent, with small dry shrinkage and wet expansion rate, good dimensional stability, and retains the natural wood grain and comfortable foot feeling of solid wood floor. Parquet combines the stability of laminate flooring with the aesthetics of hardwood flooring, and has environmental advantages.

Both types of flooring have their own advantages and disadvantages, but in general, solid wood multilayer flooring is better than laminate flooring.

1. These two floors have high dimensional stability, are not easy to deform, and are suitable for floor heating installation.

2. From the price point of view, solid wood multi-layer flooring is higher than laminate flooring, but lower than pure solid wood flooring.

3. From the perspective of wear resistance, because the solid wood multi-layer floor is made of natural wood as the surface layer and is not covered with a wear-resistant layer, the wear-resistant performance is not as good as that of the laminate floor, and it will appear more delicate.

4. From the perspective of efficacy, laminate flooring is a substitute due to the scarcity of wood and other reasons, and it only has basic functions and decorative functions. Solid wood multi-layer flooring is made of multiple layers of wood chips, and the surface is covered with rare wood species, which has the natural characteristics of wood.

5. From the perspective of environmental performance, because the main body of solid wood multi-layer floor is composed of natural wood, the environmental performance is better than that of laminate flooring In addition, solid wood multi-layer floor has a more comfortable foot feeling, better thermal insulation performance and has the effect of regulating air humidity.

Three-layer parquet is of good quality and more expensive; Parquet flooring is more common and relatively inexpensive.

Specific differences: 1. The solid wood floor is selected from natural natural wood as the main material, and it is naturally muddy without the process of processing, but it is also the unique nature of wood, which is easy to warp and deform. This usually does not happen with laminate flooring that is produced by it.

2. The multi-layer solid wood floor is not very strong in terms of wear-resistant function, and in the composite floor, there is also a big difference between the wear-resistant function of the solid wood parquet and the wear-resistant function of the laminate floor. Laminate flooring adds some special factors, so it will be better than ordinary solid wood flooring in terms of wear resistance.

3. In terms of environmental protection, the multi-layer solid wood flooring with natural wood is a green product, but the composite floor has to use some additives more or less, so the formaldehyde and other indicators are higher than that of solid wood flooring.

4. The multi-layer solid wood floor is made of logs as a whole, without adhesion and splicing, only the appearance has been painted, which belongs to natural decorations, no harmful substances and no pollution, and the price is high. However, the solid wood floor can not be used for geothermal heating, because the nails that initially fixed the keel will damage the geothermal pipes, and the overhead paving will also affect the geothermal effect.

The parquet is made of many layers of wood thrown together, the basic composition is logs, it is divided into three layers and multiple layers, usually the outer layer is precious wood, the lower layer is general wood. Its advantage is that it is similar to the solid wood floor, and it can be laid with keels when paving, and there are also those that are laid without keels, which feel very similar to solid wood floors and are as comfortable as walking on them. If the stud is used to pave the parquet, it cannot be used for geothermal heating.

Answer dear drop 1, the nature is different: multi-layer solid wood board is made of three or more layers of veneer or thin board glue hot pressing. Solid wood plywood is divided into multi-layer solid wood plywood and three-layer solid wood plywood.

2. Different characteristics: the plywood of multi-layer solid wood board is generally divided into six specifications (1 centi, 1 centi, 15 centiboard, 18 centiboard) (1 centi, 1mm). Because the solid wood plywood is a multi-layer structure, it relieves the expansion force of geothermal heat on the wood, which is equivalent to the cushioning effect.

3. Different uses: Solid wood plywood is suitable as a floor for geothermal heating. Because the solid wood plywood is a multi-layer structure, it relieves the expansion force of geothermal heat on the wood, which is equivalent to the cushioning effect.

Dear drop 1, the nature is different: multi-layer solid wood board is made of three-layer or multi-layer veneer or thin board glue hot pressing. Solid wood plywood is divided into multi-layer solid wood plywood and three-layer solid wood plywood.

2. Different characteristics: the plywood of multi-layer solid wood board is generally divided into six specifications (1 centi, 1 centi, 15 centiboard, 18 centiboard) (1 centi, 1mm). Because the solid wood plywood is a multi-layer structure, it relieves the expansion force of geothermal heat on the wood, which is equivalent to the cushioning effect.

3. Different uses: Solid wood plywood is suitable as a floor for geothermal heating. Because the solid wood plywood is a multi-layer structure, it relieves the expansion force of geothermal heat on the wood, which is equivalent to the cushioning effect.

Question: Is it good to make a wardrobe with Mocha whole house custom ecological board?