-
Anonymous users2024-01-24There are two small holes on the inside of the toilet seat, which are pressed into the screws. The one in my own house has two screws. The nut is in the bottom. You can feel it by going down and inside the tank. Release it and you can remove it. Then press the one you bought.
-
Anonymous users2024-01-23This question is very simple, and there are manuals.
-
Anonymous users2024-01-22Install the screws on the underside of the toilet.
How to change the toilet seat.
Method 1: When changing the toilet seat, we need to remove the fixing bolt on the back of the toilet to replace it; When installing, you can operate in the opposite direction. There is no difference in size of the general toilet seat, just adjust the two bolts when installing. >>>More
How can your toilet be used for him to use tools in the errand.
There is a nut directly below the red circle, and from the lower position on the side, you can see that the nut is loose and can be easily twisted by hand. If you want to remove, you can unscrew the two nuts, and if it's just to solve the shaking, tighten the nuts.
For the locking type, the expansion plug should be knocked into the mounting hole first, and then the locking screw.
When changing the toilet seat, we need to remove the fixing bolt at the back of the toilet to replace it; When installing, you can operate in the opposite direction. There is no difference in size of the general toilet seat, just adjust the two bolts when installing. But you also need to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace!