-
Anonymous users2024-01-241. All because the cabinets that come out of the factory are standard, and the factory will not dig the gap in your water separator or sewer pipe. It is all cut on the spot, and as for the problem of cutting surface edge banding, the standards of each manufacturer are different. Some of them are hand-sealed.
Even if it is not sealed, there is no problem.
-
Anonymous users2024-01-23Due to the tool limitation in the cutting process, you can use a small edge banding machine to seal the edge, or you can use the edge banding strip with hot melt adhesive to blow and paste with a hot air blower.
There is a certain amount of dust, but it will not be particularly large, don't worry, anyway, it will not be installed by people.
In the process of assembling the headbox, the most important thing is to ensure the joint research between the lathe bed and the headbox. It is important to scrape the headboard box mounting surface, which has a uniform contact rate with the bottom surface of the headstock. FYI.
This needs to look at the picture to judge, and the following provides a method to identify solid wood, I hope it can help you. >>>More
Borne by the furniture company.
Use plastic steel clay or marble glue to glue up.