The balcony gypsum board ceiling was wet by a water leak upstairs, and a piece needs to be replaced

Updated on Balcony 2024-06-09
3 answers
  1. Anonymous users2024-01-24

    Summary. Hello. The balcony plasterboard ceiling was wet with a water leak and needed to be replaced.

    The amount of water is small, it must be fine, if it is deformed and discolored, it must be replaced, and the strength of the gypsum board penetrated by water is very low, and there is a danger of falling off. If the upstairs water leakage problem has been completely solved, and the gypsum board does not appear obvious bulging, peeling off the paper and other phenomena, it does not need to be replaced, but the next process can only be carried out after all the water stains are naturally dry. Generally, it will not crack, unless it is too long, but the ceiling at home will be moldy and sagging.

    The balcony gypsum board ceiling was wet by a water leak upstairs, and a piece needs to be replaced

    Hello. The balcony plasterboard ceiling was wet with a water leak and needed to be replaced. The amount of water is small, it must be fine, if it is deformed and discolored, it must be replaced, and the strength of the plasterboard is very low, and there is a danger of falling off.

    If the upstairs water leakage problem has been completely solved, and the gypsum board does not appear obvious bulging, peeling off the paper and other phenomena, it does not need to be replaced, but the next process can only be carried out after all the water stains are naturally dry. Generally, it will not crack, unless the hail is too long, and the ceiling at home will be moldy and sagging.

    Hello. Gypsum board is a kind of material building material made of building gypsum as the main raw material. It is a kind of building materials with light weight, high strength, thin thickness, convenience, sound insulation, heat insulation and fire resistance, and is one of the new lightweight boards that are currently focused on development.

    2. Gypsum board has been widely used in the interior partition walls of various buildings such as residences, buildings, shops, hotels and industrial plants, wall cladding panels (instead of wall plastering layers), ceilings, sound-absorbing panels, ground covers, base boards and various decorative boards. Ordinary gypsum board size: 1200*3000 or 1200*2440.

  2. Anonymous users2024-01-23

    1. The amount of water is small, it must be fine, if it is deformed and discolored, it must be replaced, the strength of the gypsum board penetrated by water is very low, and there is a danger of falling off.

    2. If the problem of water leakage upstairs has been completely solved, and the gypsum board does not appear obvious bulging, peeling off the paper and other phenomena, it does not need to be replaced, but the next process can only be carried out after all the water stains are naturally dry.

    3. Generally, it will not crack, unless it is too long, but the ceiling at home will be moldy and sagging.

  3. Anonymous users2024-01-22

    If the problem of water leakage upstairs has been completely solved, there is no need for the plasterboard to appear obvious bulging and peeling off of the paper

    If it is replaced, it is only necessary to dry all the water stains naturally before the next process (batch putty) can be carried out

Related questions
3 answers2024-06-09

Depending on the degree of wetting, if the gypscale absorbs more water, the gypsum board will bend down (bulge), and the latex paint on the surface will fall off. In this case, it is necessary to replace the gypsum board, re-batch putty, and brush latex paint. If this is not the case, at most re-brush the latex paint, but first remove the original putty layer and batch the putty, and the gypsum board can not be replaced.

2 answers2024-06-09

In order to avoid the ceiling hanging down and smashing people in the later stage, replace it if the economy allows, so rest assured, and then replace it before letting the upstairs control the water leakage.

6 answers2024-06-09

If the bubble is not serious, just brush a layer of putty, and if it is serious, you need to replace the gypsum board. >>>More

3 answers2024-06-09

It seems that your decoration master's level machine book is not good, there is no good way, if I knock it out, and redecorate it again.

1 answers2024-06-09

It depends on the situation, gypsum board is generally damp and nothing is fine, if it is too serious, such as surface bubble deformation or sagging, it needs to be replaced.