-
Anonymous users2024-01-241.Vinegar descaling method: pour the mixture of vinegar and water into the toilet, and after soaking for half a day, the scale will be brushed off.
2.Sandpaper descaling method: Use the finest sandpaper to rub the toilet dirt to remove the dirt that the detergent can't remove.
3.Baking soda descaling: Sprinkle baking soda on the toilet bowl and brew it with hot boiled water for half an hour to brush off the dirt.
4.Bleaching powder solution descaling method: wipe it with bleach solution first, and then rinse it with water after a while.
5.Homemade small brush to scrub the toilet: the flush toilet produces yellow dirt, which is difficult to clean with a brush, you can tie the waste nylon socks to one end of the stick, dip it in foaming detergent to scrub, clean it for 1 month, and keep the toilet white.
6.Detergent descaling: Put an appropriate amount of water in the toilet bowl first, clean it with a toilet brush, then pour in 5-10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it.
If the dirt is heavy, you can pour a little more detergent to soak and brush until it is clean. Hydrochloric acid is very corrosive, if you wash with hydrochloric acid, pay attention to safety and do not splash on the skin.
-
Anonymous users2024-01-23Just buy a bottle of Coke, pour it in the toilet, and flush it with water after a few minutes, and the toilet will be very clean.
-
Anonymous users2024-01-221 There are toilet cleaners bought in the supermarket to clean the toilet What Mr. Vermeer What or something I also use at home The toilet bowl I also use at home is very white, when you use it, first put the water in the toilet clean and then pour Mr. Vermeer and the like into a dirty place, and after 10 minutes use a brush to brush The effect is better and then clean it is cleaner, but remember to wear a mask when cleaning Remember to open the window for ventilation after cleaning 2, use dilute hydrochloric acid, because hydrochloric acid has the strongest ability to dissolve alkali. However, concentrated hydrochloric acid should not be used, because concentrated hydrochloric acid can corrode sewer pipes. If it's not very serious, just brush it vigorously with a brush.
3.Oxalic acid is the safest product, you just need to add oxalic acid with warm water and pour it into the toilet bowl for ten minutes, and then scrub it.
-
Anonymous users2024-01-21Mr. Vermeer toilet cleaner + toilet brush, clean immediately.
-
Anonymous users2024-01-20I use a toilet brush, I haven't used any other methods.
The toilet cleaner is not good, so you can get some sulfuric acid, be careful to burn your hands, wear a mask, the taste is very bad, and it is not expensive to sell it in a chemical store.
Go to the supermarket to buy a toilet cleaner, pour more and soak it overnight and scrub it with a toilet cleaner. If only there were a few more washes.
The acidic toilet cleaner bought in the supermarket has a certain sterilization and deodorization function, and can neutralize stubborn stains such as urine alkali, so the acidic toilet cleaning is used in the bathroom to remove the stubborn urine alkali at the bottom of the toilet, which is the best. >>>More
Go to the supermarket to buy a clean toilet, buy a toilet brush, go back and add water to the toilet and stir it a few times, don't add too much water, there will be bubbles, pour it on the urine stains, and brush it with a brush It is easy to come down. That's how I do it all the time.
You can rub it with a Viss ball and soapy water, if it is too thick, you can only coat it with sulfuric acid, but you should be careful in the operation process.