-
Anonymous users2024-01-24How to distinguish the quality of ceramic tiles?
Clause. 1. Degree of simulation: degree of restoration
Whether it is true or not is the first element to test the ceramic tiles. Comparing the two together, all you have to do is compare the similarity of the two, and the higher the similarity, the better.
Clause. Second, the degree of repetition: the stone texture does not repeat the area of 5 square meters, you need to extract a box of tiles to spread on the ground, to see whether the pattern is repeated, remember that the area of non-repeat is at least 5 square meters or more to pass.
Clause. 3. Fine India: The brick surface is 0 grid and high-precision printing.
Problems such as grids, blurred textures, and mechanical printing marks are intolerable to a high-quality tile, how to identify? 10CM away from the tile, the naked eye can not see the grid for the top grade.
Clause. Fourth, the degree of vitrification: water absorption rate The water absorption rate should not be exceeded, it is not easy to hide dirt and dirt, and it is easier to maintain and take care of.
You need to drip water on the back of the tile, if the water infiltrates slowly or does not absorb water, the denser the tile, the better the quality.
Clause. 5. Hardness: The hardness should be 6 grades.
The hardness of a good marble tile is not less than grade 6 to ensure its wear and pressure resistance. All you have to do is use a hard iron tool such as a blade to scratch the surface of the tile, and the one without scratches is the best quality.
Clause. 6. Self-cleaning: When the stain resistance coefficient should be 5 level inspection, you can drip ink, soy sauce, vinegar and other liquids on the surface of the tile, wait for a while and wipe it clean, and it is better to have no residue.
Clause. 7. Density: The higher the weight of 25Kg per square meter of tile, the thicker the tile, the more sufficient the material, and the higher the density.
The density of a good tile should meet the weight of 25Kg per square meter of tile. Cut different tiles into the same specification and weigh the comparison, the heavier is better.
-
Anonymous users2024-01-23Vitrified tiles on the walls, glazed tiles on the floor, or all made of porcelain, are just very expensive.
-
Anonymous users2024-01-22Now the use of seamless bricks, the bathroom can be large tiles, small bricks should also be small, the color beige warm point, white and talk about green are relatively clean and tidy, I personally prefer light green, very refreshing!
Today's young people, no matter where they go, travel, eat, and go to the toilet all love to take selfies, so are you using a variety of P picture software, for fear that your own shooting is not beautiful, so now teach you a trick to shoot the effect of stars without various software, come and learn! That is to install a mirror in your bathroom, and a mirror can get the desire to take a selfie, without any retouching software, you can shoot as you want! >>>More
If the area of the room is small, try to use smaller specifications, specifically, generally if the living room area is less than 30 square meters, consider using 600*600; If it is 30-40 flat, 600*600 or 800*800 can be used; If it is more than 40 square meters, you can consider using 800*800. As far as the effect is concerned, it is better to have all the tiles paved in full, which means that the edge is not cut or cut less bricks to minimize waste. >>>More
.The operating environment of the kitchen is a high temperature environment, so the color of the kitchen tile should be based on light and cold colors, such as white, light green, light gray and other colors. Such colors will make people feel the breath and coolness of spring in high temperature conditions, and light tones can make people feel that the space is expanding and extending, avoiding the dull and oppressive feeling of dark tones in a small space.
The bathroom environment is humid and consumes a lot of water every day, so most of the tiles are used to decorate when decorating, because the waterproof and moisture-proof properties of tiles are better than that of the floor, but in order to achieve the ideal decorative effect. >>>More
If you are talking about using wooden materials as flooring in the bathroom, then as far as the current decorative materials are concerned, it should be said that you can only use anti-corrosion wood, and anti-corrosion wood can be used to resist moisture and decay, but in the end it is not as good as using non-slip bricks.