-
Anonymous users2024-01-24When choosing floor tiles, it is important to consider the following aspects: First, it depends on the brand. Only well-known brands of floor tiles, the quality of their building materials can meet the national standards, and the content of harmful substances can be within a safe range.
Second, it depends on its anti-pollution ability, if the family is very busy and can only clean once in two or three days, then choose the one with better anti-pollution ability. Third, if there are elderly people and children at home, you must do a slip resistance test when purchasing.
Specifically, the selection of floor tiles can start from the following aspects:
1.To see if the color of the tile is pure. Mainly observe whether the color of the back of the tile is uniform and consistent.
2.It is necessary to observe whether the particles of the cross-section of the tile are fine. The cross-section here does not refer to the cutting surface around the tile, but to the fracture of the tile fragment.
Generally speaking, the fracture is fine, hard and brittle, and the color is the same. Because the ceramic tiles with fine particles have strong waterproof ability, while the tiles with large particles are easy to soak in moisture, which affects the quality.
3.Pay attention to the thickness of the glaze layer. The thickness of the glaze layer is the thickness of the cross-section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles, and the thicker the glaze, the better the quality.
4.To listen. Tap the tile to pay attention to whether the sound is crisp, such as the sound is clear and pleasant, such as the sound is dull, it is inferior.
5.Test the waters. Consumers can pour some water on the back of the tile and pay attention to how quickly the tile absorbs water. After a few minutes, see if the marks left by the water on the front are obvious. The density of tiles that infiltrate slowly after the water disperses is large, and the marks left by the water are not obvious, so they are regarded as the top grade.
6.Warp. Take two bricks back to back and face to face to see if they can be in close contact, and there is no phenomenon that the gap is too large to judge whether there is warping.
7.Infiltration. Find ink to apply to the surface for 1 hour and then scrub to see if there are traces, no traces are good bricks, and those that have infiltration are resolutely not selected.
<> the bathroom floor tiles can be laid with dry paste paving, no need to use cement mortar, no need to soak the tiles in advance, the base surface can also be paved in a dry state, as long as the tile adhesive is used. This paving method is relatively simple, and also improves the construction efficiency of workers. When laying floor tiles, you can also use the joint pavement method, that is, leave a certain gap between each floor tile, and then fill it with a beautiful joint, so as to avoid water seepage in the gap, and it is also more beautiful in terms of effect.
The tiles in the bathroom are often stained by greasy, rust, soap stains, etc., in order to keep the porcelain surface clean and not damage the porcelain surface brightness, you can use a multi-functional stain remover to clean it. As for the gaps in the tiles, you can first use a brush dipped in a little detergent to remove the dirt, and then brush a waterproof agent on the gaps.
Let's say your actual bathroom is 10 square meters in size. >>>More
There are certain differences in the price of tiles in various places, the difficulty of tile inlay, whether parquet, the size of tiles, wall tiles, floor tiles, the price gap is also very large, the most common one is about 48 yuan a square. >>>More
Squeeze an appropriate amount of toothpaste on the brush and brush directly at the seams of the tiles. >>>More