What to do if the tiles on the kitchen wall are up

Updated on Kitchen 2024-06-29
1 answers
  1. Anonymous users2024-01-24

    If you want to return to the original level, you have to remove it and re-paste it.

    Once the wall tiles are detached from the wall or partially detached, they are basically uneven. As long as the brick is detached, there will be tiny grit falling off, caught in the gap between the brick and the wall, so that the wall tile cannot be reset.

    If you just find it ugly, find the master who used to put wall tiles on your house to deal with it. This problem is caused by improper construction, and there is no need to be entangled, and it is normal for manual operation to make mistakes.

Related questions
2 answers2024-06-29

Lift the side seams of the upturned tiles with a blade, and pour the cement into a thin soup, and pour water before pouring it. Press down with a weight after filling. It is easy to pull after two days of solidification.

2 answers2024-06-29

It may be that the cement stability of the cement mortar is unqualified or the floor mortar has a large area of quicklime, and the cold expansion is serious, resulting in the floor convex cracking, and the second possibility is that the mortar layer becomes an aquifer, and the water is frozen by the ice volume expansion. >>>More

1 answers2024-06-29

This situation is rare, generally found in winter, and regardless of the building and bungalow, the main reason is that the temperature difference between indoor and outdoor is too large, when the room temperature is very high in winter, the floor tiles and the concrete under the bottom maintain a relatively stable state, if the cold air is too involved, such as the door and window open for too long, and then thermal expansion and contraction, the shrinkage coefficient of the floor tile and the concrete is not the same, so that the floor tile and the concrete are separated, resulting in the floor tile bulge. >>>More

7 answers2024-06-29

1. Check whether the toilet is aging After using the toilet, if there is no water or the water pressure is not enough when flushing, the dirt in the toilet will not be flushed away. Slowly, the dirt inside the toilet will block the place where the toilet turns and cause the toilet to clog. If it is determined that the reason for the aging of the toilet is causing the blockage, then there is no need to repair it, and it is better to replace it with a new one! >>>More

1 answers2024-06-29

There are many reasons for tile cracking.

Mainly including improper construction, such as hollow drumming, poor quality of tiles, etc., will cause tile cracking, the specific cause needs to be determined in combination with the actual inspection of the site. >>>More