-
Anonymous users2024-01-24Hello, look under the water tank, you can put your hand in from the back no, behind the toilet, under the water tank. If you can't get in, you have to disassemble the toilet and install it on the bar toilet after fastening it.
You can use the wire cutter to reach in and clamp the nut, open the decorative cover above the lid to see if the screw can be tightened, you can use the plastic bottle mouth (bottle cut) to connect a rod to the nut and turn it a few times to fix it, try it.
Can I take a picture and take a look? The toilet seat is generally locked and locked, so you have to look at it to know it.
Don't go down there. You look at the toilet seat screwing there is a plastic cap, and you can see the screw when you warp it down, which can generally be tightened with a flat screwdriver.
Emergency Treatment:
Put a little plastic strip in the screw hole, which is the kind of supermarket plastic bag torn into strips, which can be stacked in several layers, stuffed into the hole, and then screwed. >>>More
Try it with an open-ended wrench or needle-nose pliers or a small movable wrench.