-
First, looking at the drawings, the thick black line is a load-bearing wall that cannot be destroyed, and the ordinary wall is a dotted line or a thin black line;
The second hole is to try, use an air hammer electric drill, provided that you pay attention to avoid the pipelines and wires buried under the wall and do not break them. The load-bearing walls are poured concrete, at least also of red brick; Non-load-bearing walls are of lightweight aerated brick or hollow brick.
Communicate with the property, he hopes that after you pay the decoration fee, you will not decorate and live directly, a hundred will not work, it is certain. If you don't move the load-bearing wall, don't change the layout of gas and plumbing, don't change the ventilation hole, don't change the smoke exhaust channel, don't change the appearance of the exterior wall, you should cut it first.
There are many walls, which are half load-bearing and half non-load-bearing, so you must pay attention to them.
-
Generally, not the load-bearing wall can be changed, the general property is not allowed to smash the load-bearing wall, this should be negotiated with the property, generally go to the designer to design these problems and communicate with the designer, he will help you consider.
-
In addition to the load-bearing wall, other walls can be smashed, and now there are many houses that are set up unreasonably, and many owners will smash the wall when decorating.
-
The load-bearing wall can not be smashed, it is best to find the property to see the structural diagram before smashing.
If you want to move, the key is to negotiate with the downstairs, this is more troublesome in general, the following is not satisfactory to try your best!
The size of the sofa can not be changed, the cost is too high, if the size is small, you may wish to add a corner, if the size is too large, there is no way, you can only pull the distance smaller.
Then it's time to customize the furniture and design it according to your needs.
Negotiation between the parties is different from online shopping. >>>More
If the water flow is not suitable, you can close the valve a little bit, or change it, it is not a quality problem and it may be difficult to retreat.