-
Anonymous users2024-01-241. All Shanghai Panda Home Improvement reminds you:
Ceiling is very common and very simple decoration behavior, it is recommended that you go to the shop to buy to ask, they have a special master will install, and they are not affiliated, so the price will not be too much moisture, if you are buying from other channels, you can also go to the store to ask the master, but because you are not in his place to buy, may delay your construction period some, the price is calculated by the square, and the price is basically unified, is the first installation after the money, he asked for more you will not give no, I wish you a smooth decoration!
-
Anonymous users2024-01-23An square meter is counted, and the daily workers are uneasy.
Hello landlord.
Generally, it is calculated according to the actual construction area, and there is no ceiling in the middle, which should not be counted in the ceiling area. >>>More
How to calculate the salary of the decoration carpenter, which algorithm is the most reasonable, listen to what the master has to say.
The size of the ceiling is 300X300mm, and the two halves that are less than half are counted as one piece, and the one that is larger than half is counted as a whole block. You can draw a simple diagram on the paper, draw the shape of a roof, and then divide it into small pieces according to the size, for example, rice, which is a little more than 5 pieces, the extra 10 centimeters are counted as half a piece, the two pieces less than 15 centimeters are counted as one piece, and the whole block is counted as a whole block and the money is OK
This is basically calculated according to the square, and the price of the light steel keel starts at almost 85 square meters; They should position the price according to the market, the selection of light steel keels, and the quality of gypsum board.
The square of the kitchen and toilet is the same as the area of the other rooms. Measure the length and width with a meter ruler and multiply them to get the square area. The meter ruler should be measured to the edge of the inner wall, which is the square of the net area. For example, the length and width of two 2 3 two 6 square meters.