-
Anonymous users2024-01-241. Disassemble the new wax sealing ring so that its round side is facing upwards and put it on the flange on the ground so that it is just above the opening. Make sure both screws are in place.
2. Lift the toilet, put it on the flange and sealing ring, and keep the toilet as level as possible. Because the sealing ring itself is also elastic, under the pressure of the toilet bowl itself, the sealing ring will slowly sink in, so that it can be sealed firmly.
3. Sit on the toilet and help seal the new seal.
4. Make sure the bedpan is kept level.
5. Reinstall the nut you just removed. Tighten the nut by hand so that it does not crack the bottom of the toilet.
6. Reconnect the water supply pipe.
7. Open the water valve to store water in the water tank. You can open the water valve halfway up and fill the tank with a low water pressure. This method will store water for a longer period of time.
8. Flush and check for water leakage.
9. Label silicone between the bedpan and the gap between the floor as needed.
10. Wash your hands with germicidal soap.
-
Anonymous users2024-01-23Place the anti-odor ring on the nozzle of the sewer, lean as far as possible towards the center of the pipe, and then align the eye of the toilet bowl with the nozzle, flatten it and rotate it vigorously.
-
Anonymous users2024-01-22It's very simple, because the sealing ring itself is also elastic, and under the pressure of the toilet bowl itself, the sealing ring will slowly sink in, so that it can be sealed firmly, so you put on the sealing ring first, and it is aimed at the sewage outlet of the bathroom, and slowly move it down. Achieve optimal tightness
It's very simple, because the sealing ring itself is also elastic, and under the pressure of the toilet bowl itself, the sealing ring will slowly sink in, so that it can be sealed firmly, so you put on the sealing ring first, and it is aimed at the sewage outlet of the bathroom, and slowly move it down. Achieve optimal tightness
There is a gap between the toilet outlet and the drain pipe, and if it is not installed, the smell will return from the gap. Generally, toilets are supplied with an anti-odor ring, which can seal this gap, which also avoids the hidden danger of aftertaste and water leakage.
1.Clean up more.
2.Place a toilet deodorant, ineffective can spray a small amount of perfume. >>>More
When installed at the bottom of the toilet between the drain and the drain.
The toilet is porcelain, and if it is broken, there is no way to repair it, so you can only go to the mall and pick your favorite toilet to buy, and there is no way to repair it.