-
Anonymous users2024-01-24This should be made by a professional machine, and the sealing film of the whole house ceiling of the times is very good, 1. Gloves must be worn to install the aluminum gusset!
2. First tear off the aluminum gusset on the four sides of the film, which can be installed from the main engine keel, and then assemble to the wall one by one, the joint gap is consistent, and the four corners of the gusset are aligned. The card position on all the trimming corner lines was pulled to 60 degrees, and then the aluminum gusset of the first keel was started, and when the last two pieces were reached, the actual size should be measured, if it was needed to cut, it should be cut and then assembled, and the cutting surface should be stuck in the middle of the card sheet and the trimming corner line surface, if necessary, the card position piece was pulled into 90 degrees. The aluminum gusset and the trimming corner lines should be kept flat (Note:
If there is unevenness, it should be fixed with wooden blocks).
There is no quick way, but it is true that you have to tear it early, because if you don't tear it early, it will be difficult to tear it after a long time.
1. Soft film ceiling hanging
Manufacture of the top moulding (du base). >>>More
Both have various advantages, this depends on what surface treatment your board has, and then you know that it is better.
The general quality is generally used in film technology, the good point is spraying, heat transfer technology, the surface may fall off the skin after a long time of filming, but in general, it lies in the protection of their own aluminum plate, and the protection of any aluminum plate can be used for a long time.
1. Generally, when you buy an integrated ceiling, the merchant will help you calculate, and it is included in the price. >>>More