-
Anonymous users2024-01-24Rigid waterproof village material refers to cement, sand and gravel as raw materials, or a small amount of admixtures, polymers and other materials mixed in it. Through the method of inhibiting or reducing the porosity, changing the pore characteristics, and increasing the compactness of the interface of each raw material, the cement mortar concrete waterproof material with a certain anti-permeability is prepared. The rigid waterproof has a long service life, but due to its weight, the structural form is more limited, and it is easy to crack and seepage.
Flexible waterproof materials are mostly organic materials such as waterproof membranes, waterproof coatings, waterproof glues, sealing materials, etc., most of which are made of linoleum, glass silk cloth and other fiber fabrics as tire layer membranes, bonded with various asphalt cementing materials, and flexible waterproofing with acrylic and polyurethane seals. Flexible waterproof materials have toughness, high tensile strength, large elongation, light weight, convenient construction, adapt to certain deformation and expansion and contraction, and are not easy to crack, but the operation technical requirements are stricter, puncture resistance and aging resistance are not as good as rigid materials, easy to age, and the service life is shorter. Rigid waterproofing and flexible waterproofing are mostly used for roof waterproofing, and most of them are used in combination of rigidity and flexibility.
However, this technique should not be used in the bathroom. The main reason is that most of the bathrooms need to be tiled, so the walls and floors are first waterproof with waterproof glue, sealant, etc., and then tiled. Not as complicated as roof waterproofing.
-
Anonymous users2024-01-23It is not recommended to use polypropylene in the bathroom, because polypropylene has a peculiar smell, if you insist on using it, you should first make polypropylene in K11 flexible coating.
How to use K11 flexible coatings: apply at least two coatings, each layer of square meters (mixed coating), a single application thickness of <2mm, and a third coat can be applied in high-risk areas. The specific construction method can be seen in the product instructions!
It's up to you to choose.
-
Anonymous users2024-01-22that makes it eas
Yes, home decoration bathroom waterproofing is a very important part of the decoration, commonly used waterproof materials are mainly polymer cement mortar waterproof materials, of which K11 waterproof is representative, suitable for use in waterproof areas such as bathrooms, kitchens, balconies, etc., it is recommended to find personnel with construction experience to carry out construction, and there is a guarantee in the later stage. Hope it helps!
Bathroom, kitchen, balcony: belong to the waterproof part of the waterfront surface. Choose rigid or cement-based waterproofing materials for toilet waterproofing practices: >>>More
I can understand what you mean by flexible waterproofing, it should refer to problems like secondary drainage, it is very necessary, because the house decoration is not a problem of one or two years, if the bathroom has been subjected to damp pressure for a long time, even if there is waterproof paint, there will be some gaps that will seep into it, and the water will accumulate more and more over time, and when the water is more and volatile can not go out, it will find the exit, at that time, the wall or door, the wall and floor tile threshold of the bathroom and other places have become this exit, so the back wall of the bathroom of many families is always wet, The moldy joints of the wall tiles and the swelling of the door are caused by the failure to do this flexible waterproofing, so it is still necessary to do it.
The well-known waterproof coating brand has Aili, which is an imported product from the United States, which has no peculiar smell and can effectively remove the peculiar smell in the bathroom, antibacterial and mildew-proof, so that the interior can be kept bright and white for a long time. Because there are many water stains in the bathroom, and the air is not well dredged and humid, you can make a mortar waterproofing agent protective layer to increase the strength of the wall and improve the puncture resistance.
Waterproof coating is better. If the pipe is irregular when using the membrane, it will increase the difficulty of the construction of the tarpaulin, and the tarpaulin will not have adhesive force, and it is easy to produce seepage and leakage in the humid environment of the bathroom. It not only reduces its waterproof effect, but also affects the aesthetics of the entire waterproof layer of the bathroom, if you use waterproof coating, the operation is simple and convenient, and the waterproof is very good.