-
Anonymous users2024-01-24Ceiling recessed downlights are generally used with openings of 7 cm, cm, and 8 cm. I haven't seen it. Now you can buy lamps with 7 cm holes. Ask the master of installation to enlarge the hole a little bit.
-
Anonymous users2024-01-23It is recommended to open it when doing carpentry, so that it will not be found when the hole is opened in the later stage or the keel of the ceiling can not be found, of course, many owners may not have determined what lamp so they do not know the size, you can open the smallest hole, and you can make up the big hole if you buy the lamp in the future, and the gypsum board is easy to open.
-
Anonymous users2024-01-22If the size of the downlight is fixed, go directly to the place where the lamp is sold and report the size. The downlight has a metal buckle, so it's okay to be a little smaller. 60's should be enough.
It is recommended to open it when doing carpentry, so that it will not be found when the hole is opened in the later stage or the keel of the ceiling can not be found, of course, many owners may not have determined what lamp so they do not know the size, you can open the smallest hole, and you can make up the big hole if you buy the lamp in the future, and the gypsum board is easy to open.
With such a small power machine, there are only split hang-up and cabinet machines.
Look at the style of expression Downlight spotlights are generally embedded in the ceiling, if the industrial style retro style modern style does not do the ceiling, it can also be replaced with track spotlights or downlights.
This phenomenon is caused by the broken lamp. It can be replaced with a new one, but it is more troublesome to remove the old one, and it is best to find a professional maintenance personnel to install it.
If it is an embedded integrated lamp with the same specifications as the ceiling, it can be removed with a special suction cup or straightened with a paper clip, and it can be plugged into a pry from the crack of the plate, this kind of lamp is very thin, if it is a lamp installed separately, there is a change cone to gently pry the cover plate seam, and the lampshade can be removed.