-
Anonymous users2024-01-241 This is all alkali, waterproof did not do a good job for you, you have no big problem, get rid of the white ash, be sure to leak out of the cement surface below, and then use cement-based permeation crystallization to smear and cure, there is no problem.
-
Anonymous users2024-01-23After the moisture is reversed, the paint is pulverized, clean it up and scrape it again.
-
Anonymous users2024-01-22Paint chalking caused by moisture resurgence! Erase and re-scrape!
This is likely to be designed for families who install household central air conditioning, and the outdoor unit of household central air conditioning is relatively large, and the general small grille cannot be put in.
1. Beautiful. The effect of tiling is definitely better than not sticking. >>>More
The balcony tiles do not need to remove the insulation layer, and the insulation treatment of the wall can not be removed at will, which will affect the thermal insulation effect of the building room, and may damage the waterproofing of the exterior wall. >>>More
Buy some dark exterior paint and apply it again.
There will still be water droplets on the brick directly, the solution is to paste the insulation board on the wall, preferably more than 3 cm, and then paste the plywood on the insulation board, you can scrape the white, you can also paste the tiles. If you don't treat it, there will be water droplets every year in the cold season.