The toilet seat is moldy, how to remove black spots

Updated on Toilet 2024-06-25
5 answers
  1. Anonymous users2024-01-24

    1. Mix a cup or 250ml of white vinegar with a little baking soda powder and pour it into the toilet, wait for 10 to 15 minutes in the morning, then wipe off the stains with a long-handled brush, and then rinse with water 2. Pour a can of cola into the toilet bowl and flush it off after an hour, the citric acid in the cola will eliminate the stain on the ceramic glaze. 3. The yellow dirt formed on the edge of the toilet bowl can be poured into the toilet bowl with a cup or 250ml of white vinegar and a little soda powder, wait for ten to fifteen minutes, then wipe off the stain with a long-handled brush, and then rinse it with water 2. Pour a can of Coke in the toilet bowl and flush it off after an hour, the citric acid in the cola will eliminate the stains on the ceramic glaze. 3. The yellow dirt formed on the edge of the flush toilet can be tied to one end of the stick with waste nylon socks, brushed with foaming land-sheltering detergent, and cleaned once a month to keep the toilet white. Raid Know.

  2. Anonymous users2024-01-23

    1. Mix a cup or 250ml of white vinegar and a little baking soda into the toilet, wait for ten to fifteen minutes, then wipe off the stains with a long-handled brush, and then rinse with water 2. Pour a can of cola into the toilet bowl and flush it off after an hour, the citric acid in the cola will eliminate the stains on the ceramic glaze. 3. The yellow dirt formed on the edge of the flush toilet can be used to dispose of the old nylon socks.

    1. Mix a cup or 250ml of white vinegar with a little baking soda powder into the toilet, wait for 10 to 15 minutes, then wipe off the stains with a long-handled brush, and then rinse with water.

    2. Pour a can of Coke into the toilet bowl and flush it off after an hour, the citric acid in the cola will eliminate the stain on the ceramic glaze.

    3. The yellow dirt formed on the edge of the toilet bowl can be tied to one end of the stick with waste nylon socks, brushed with foaming detergent, and cleaned once a month to keep the toilet white.

  3. Anonymous users2024-01-22

    If it is the plastic ring on the toilet that can be lifted and lowered, it may really not be washed off, and it can be covered up by a sleeve or a pad paper.

  4. Anonymous users2024-01-21

    Use adhesive remover, spray with water while spraying, and it will be done in 10 seconds.

  5. Anonymous users2024-01-20

    The brain-dead, people are asking about the toilet seat, what do you say about the toilet inside, a bottle of supermarket in the supermarket is white and bright for a year!

Related questions
1 answers2024-06-25

There is no way to do turtle marks, and other normal toothpaste can be easily done.

1 answers2024-06-25

It is not heated instantaneously, but at a constant temperature, and then heated up when in use.

3 answers2024-06-25

The toilet has a lot of stains and smells, teach you a trick, and it will be clean and odorless if you don't brush it for a few months.

22 answers2024-06-25

1. Toilet Cleaner: Prepare a bottle of Toilet Cleaner and pour about 3-4 drops into the toilet. Soak for about 10 minutes, use a toilet brush to clean it, and finally flush it with water. >>>More

16 answers2024-06-25

1.Not an actual exhaust fan.

If the exhaust fan is installed in reverse, it will cause the air in the toilet to be uncirculated, and it is easy to cause the "smell" of the toilet to reflux. The way is to take a piece of paper and put it at the door of the exhaust fan, check whether the air has backflow, and it is recommended to change to a sealed exhaust fan. >>>More