Usage of hand cranked toilet unclogging

The correct operation method is: there is a U-shaped water storage bay inside the toilet, and the head of the hand-cranked toilet dredge should be facing the direction of the storage bay, and you can slowly enter it while plugging it.

Toilet sparse is usually used in the following ways:

The dun cloth method first puts the dun cloth at the mouth of the toilet, and then discharges the water to ensure that the water submerges the dun cloth. Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

Find a longer stretch of plastic water pipe, connect one end to the tap water, plug the other end into the toilet mouth, then plug the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to unclog the pipe.

Go to a 2 yuan store or grocery store to buy a manual dredge (something that looks like a spring), and dredge it yourself, and a dredge is a few yuan.

1. There are many kinds of simple dredging sewer blockage methods, today we will talk about this hand-cranked dredge dredge for simple dredging sewer in the picture. Experiments have proved that this kind of dredging device is currently effective in dredging pipes. This is shown in the image below.

>2. The handle of this simple hand-cranked dredge for dredging the sewer is made of high-quality plastic, which lasts a long time and is also durable. It also feels good and is loved by everyone. This is shown in the image below.

>3. This hand-cranked dredge for simple dredging of sewers can be used for a variety of pickpockets in the picture below, such as toilets, washbasins, vegetable pools, bathtubs, etc. This is shown in the image below.

>4. Open the screws first, put the spring into the pipe, pay attention to the correct installation, don't skew, or it will not affect the effect of dredging the sewer or damage the simple hand dredger. This is shown in the image below.

>5. When encountering a blockage or the spring at the bend cannot enter, it is best to tighten the screws on the simple hand crank dredge. This is shown in the image below.

>6. Then press down hard while rotating the rocker in a clockwise direction until the blockage is taken out or through the bend. This is shown in the image below.

>7. Pull out the dredge or spring backwards, if you encounter a bend, you should operate according to steps 2-3, if you can't pull it out, you can reverse the spring high needle and rotate the crank.

2. Then aim the suction cups at the place where the toilet drains, and they need to be glued together without gaps.

3. Then use the hand handle to ask the person next to you to help you hold the toilet dredger, stuff it inside, and rotate it at the same time.

4. After reaching inside, press down, then rotate the handle, and then take out the things in the toilet that are plugged in the pipe.

Stuff the head into the drain, shake it with your hand, shake it slowly, pull it out, clean it and repeat the above steps.