-
Anonymous users2024-01-24First, look at whether the sensor light is on, and see if the filter is blocked.
-
Anonymous users2024-01-23Answer 1, do not spray water in the case of: the outlet does not spray water, this is relatively simple, you can observe whether it is a problem with the water pipe or no water, if there is a problem with the water pipe, you can go to the maintenance point for maintenance; The washing head does not spray water, if it does not spray water for a short time, it may be the pressurization design of the toilet seat, because the water tank is sealed when designed, there is no booster valve, and the pressure of the tap water itself has no big impact; If the cleaning head does not spray water for a long time, it may be that the water quality is too poor, and it is recommended to find a local dealer for after-sales.
2. Check the remote control, water discharge motor, and hall plate. First of all, see if the remote control is automatically drained to see if the water is turned on, re-switch to see if the status indicator light is on, if it has been set and does not automatically drain water, then detect whether the motor and hall plate are broken, and replace them in time if damaged.
Now no one buys the slow fall, all buy the slow rise, now there is a smart toilet that does not need to be plugged in, which will automatically open the seat, environmental protection, safety, suitable for multiple people in the family, Tao keeps and sells, more cost-effective than the smart toilet that uses electricity, you can refer to it.
You check whether the water inlet valve is open, and then use a needle to pass through the water spray to see if it is blocked.
1. One reason is that the water pressure at that time was relatively low, because many toilets are now pumped, and if the water pressure is relatively low, it will lead to the problem of difficulty in getting water. Another is that many houses are on the upper floors, and when it comes to the peak of water use, the overall water pressure is relatively low, which also leads to the inability to get water. >>>More
If you close the toilet lid and the water will flow, it may be that the toilet pumping system is broken, you can open the lid of the toilet pumping tank to check whether the pumping system is normal.
Suggestion: Go to the supermarket to buy a water pipe cleaner, as long as you follow the instructions for use. Ordinary blockage problems, it can be solved, you might as well give it a try.