-
Anonymous users2024-01-24Repair the cavities in the plasterboard ceiling:
1. Cut the gypsum board into a similar shape and less than or equal to the size of the cavity;
2. Strengthen the keel on the top inner side of the hollow and fix it;
3. Fix the prepared small gypsum board on the keel at the hollow;
4. Then use caulking gypsum to feed the joints, paste caulking tape, and putty leveling;
5. Then, according to the specific situation, the emulsion paint is treated locally or the entire top.
There will be no traces after repair.
-
Anonymous users2024-01-23Several lighting square lamps with integrated ceilings can be installed.
-
Anonymous users2024-01-22If you install the lamp, buy a few according to the original specifications and install it, and if you don't install the lamp, use white paper on the lake or repair it with gypsum board and then paint it white.
-
Anonymous users2024-01-21Buy a few new downlights or spotlights and put them on.
For partial repair, it is better to ask someone to see the board to repair and scrape putty, and it is better to install a socket panel in the ceiling hole to cover and repair. Fall.
Seal with carpentry tape paper, if the large hole is leveled with paper gypsum board, and then putty is leveled, and the paint is repaired.
It should be a cast iron pipe, buy a group of 1KG dry hanging glue, clean the surface of the pipe, reconcile the A group glue and B glue of the dry hanging glue in proportion, find a piece of hard plastic to bond directly, and use the toilet after a day (PVC pipe is also suitable).
1. Remove the loose plaster around the hole to make the edge line. >>>More
The spotlight hole in the plasterboard ceiling is larger than the lamp, and it has to be repaired properly. >>>More