Urgently, should the bathroom wall tile be made of waterproof waterproofing agent

Yes, at least.

Bathroom wall waterproofing practices:

Ordinary toilets occupy a relatively small area, so membrane waterproofing is rarely used in the choice of coatings. There are basically two situations of coating waterproofing, one is polyurethane waterproof coating, and the other is modified asphalt waterproof coating. Here's how:

1. The ground is oriented to the slope of the floor drain, in the case of ensuring that the surface is smooth, the use of bean stone concrete or cement mortar, the specific situation is analyzed, generally speaking, the slope near the floor drain is large, and the slope near the door is small.

2. Where the pipeline passes through the root of the floor slab, the waterproof strength should be greater. After the cement is smoothed, it can be brushed with waterproof coating, which is generally close to the glass cloth reinforcement layer 1 2 layers.

3. At the junction of the wall, where there is a slope, it should be strengthened when brushing the waterproof coating, about 1-2 layers.

4. The total thickness of the polyurethane waterproof coating film.

The requirement is millimeters or more.

5. When painting the paint, it should be painted inside and back to square meters, and the next painting can be perpendicular to the direction of the previous painting.

6. If there is a package riser, the waterproof should be done first and then the package riser should be made.

7. When the last piece is painted, the coarse sand particles should be thrown.

Precautions for waterproofing the bathroom wall.

1. The choice of waterproof coating is very important, and we must choose a good coating, otherwise it will cause the phenomenon of paint peeling, which will not play the role of waterproofing.

2. Before the wall waterproof decoration begins, it must go through a strict waterproof inspection before starting other projects.

3. It is best to find a professional decoration company for wall waterproofing, otherwise there will be unexpected mistakes.

The bathroom must be waterproofed!

Bathroom waterproofing is divided into bottom layer and surface layer.

Bottom layer waterproofing: refers to the waterproofing done before the tiles are laid, and the waterproof mortar is used in the ordinary process (but the disadvantage is that there are many mixed brands on the market, and the mortar solidifies into a layer of film after drying, and it is easy to break if the tile gesture is heavier);

Surface waterproofing: refers to laying tiles and filling the brick joints, in the overall surface to do a layer of waterproofing, the biggest role of the waterproof layer is to directly repel any moisture of the sanitary napkin on the surface of the tile, this process must be waterproof coating, must consider whether it affects the appearance of the tile, whether it can penetrate through the tile, whether it can withstand water pressure and long-term soaking.

Toilet leakage occurs in several situations: brick surface water seepage, brick joint water seepage, brick joint leakage, and broken water pipes in the wall. (The first three of these can be completely solved by the above processes).

You can come directly to me and make a preferential and money-saving waterproof plan for you

The wall of the bathroom needs to be waterproofed, which is the standard of architectural decoration, which can not be ignored, and it will also affect your residence if you do not do waterproof for a long time, because there must be a room next door to your bathroom, and there is a simple decoration on the wall. If your hygiene has not been waterproofed for a long time, the water on the bathroom wall will easily corrode and affect your other rooms, so it is necessary to do waterproofing on the bathroom wall.

1.Regardless of whether the bathroom is tiled or not, a waterproof process must be done.

2.It is not recommended to use waterproofing agent in the bathroom, waterproofing agent is mainly a thin film to play a waterproof effect, and the waterproof time is not long.

3.It is recommended to use a general-purpose waterproof coating, and if the funds allow, it is best to use a flexible type.

Biyou Group will answer for you!

The bathroom floor must be re-waterproofed, and a closed water test must be done. In general, the wall part is 300mm higher from the ground, and the shower position is 1800mm.

Of course, if the walls and floors are all waterproof, the effect is better, but the cost is relatively higher. As for the materials, I recommend using relatively good waterproof materials such as Yuhong, Henkel, and Degao. But no matter which brand it is, it must be flexible.

Prepare the polymer cement-based waterproof coating according to the product instructions. Use a brush or roller brush to apply directly to the base surface, and the strength is used evenly, and the brush should not be missed; Generally, it needs to be brushed twice (according to the requirements of use), and the thickness of each brush should not exceed 1mm; After the previous one is slightly dry, the next brush is carried out (just non-sticky, generally 1-2 hours apart), and the front and back two vertical cross brushes, the total thickness of the brush is generally 1-2mm; If the coating has already cured, moisten it with water first when applying another layer. When painting the ground, there should be about 10 overlaps with the old waterproof layer of the exposed wall.

You can use tile adhesive, no need to do waterproofing!

The necessity of tile adhesive used in home decoration.

"Tile adhesive" is widely used as an indispensable decoration material in home decoration, and its cement-based adhesive composed of polymers and other materials can be used in almost all kinds of ceramic tiles with special formulations. The use of tile adhesive makes the decoration of kitchen and bathroom have the following advantages:

Good water retention, not easy to produce hollow drum;

High bond strength, no falling off;

REDUCE THE LOAD-BEARING CAPACITY OF THE BUILDING, FROM THE AMOUNT OF CEMENT REQUIRED PER SQUARE METER FOR TRADITIONAL PAVING 1 1 18KG TO 4 5KG OF TILE ADHESIVE, THEREBY REDUCING THE OCCURRENCE OF BUILDING SETTLEMENT AND CRACKING;

The thickness of tile adhesive is much smaller than that of traditional cement, saving valuable space and location;

The on-site construction environment is clean; Ordinary plastic drums can be used to mix materials;

Tile adhesive construction is very convenient; No need to soak bricks and wet walls;

In a new house that has just moved in, the cement paste tiles have a hollow drum, which causes the tiles to fall off after a long time; The tile paving without reserved gaps ...... burst the corners after experiencing the temperature differenceIn real life, we often encounter the above situation: the house that has spent several months and spent tens of thousands, hundreds of thousands, or even millions of dollars to renovate has not yet come out of the freshness of moving in, and it encounters a lot of troubles in the kitchen, bathroom and other spaces. Of course, there are also some consumers who do not choose the right brand and high-quality products, which leads to some consumer problems.

Therefore, experts recommend that we not only use it correctly, but also buy it correctly, and truly take responsibility for our new home from the "inside", and choose brands and products that can really benefit you in the long run. Choose the Oria tile adhesive series.

Excellent quality: tasteless, non-toxic, environmentally friendly; Tiles never fall; Strong adhesion, high flexibility, resistance to displacement and settlement.

Save time and money. With "Oria" tile adhesive, each worker can complete about 30 40 square meters of tile paving work per day, while the traditional method of construction, each worker can only complete 5 8 square meters of paving per day. Savings of more than 50% per square meter of tiles can be achieved, and the more you use, the lower the cost.

Wide range of applications. OLY tile adhesive products have a wide range of applications, which can be applied to the interior decoration of bathrooms, kitchens, etc., the exterior decoration of gardens, balconies, etc., as well as the decoration of walls and floors.

All need to be waterproof, regardless of whether the tile glue (or something similar) of the wall tile has a waterproof effect, its main function is to paste the tile, and the waterproof still has to be done! One shop to the top or meters to 2 meters (the building code says so, and I personally agree)!

As long as you do waterproofing below 300, the above one, the developer has done it. Of course, if you have more money, you can do it higher. The point is that the ground is to do it, and it is better to do the test.

The waterproofing of the bathroom is very important, generally in the hands of the developer has done a waterproofing, but in order not to appear in the future, the trouble of water seepage, when the wall is tiled, it is also necessary to do a waterproof, according to the ergonomics on the building decoration, generally do a high waterproof layer, now everyone is using the waterproof material JS composite waterproof coating, HG203 water-curing sealing waterproof coating, acrylic advanced elastic waterproof coating and so on. The results are very good!

It depends on the situation:

1. If you have a separate bathroom space, especially if you take a bath or something that will not splash on the bathroom wall, you can choose to do it.

Second, if there is no separate bathroom space, although the wall is tiled, but the water will still seep down from the cement gap, it is recommended that the bathroom wall in the tile, do a layer of waterproofing, at least half a person high (usually take a bath or something will splash to the place).

It is recommended to make a waterproof layer, otherwise if the water leaks downstairs at that time, many things will come out

It needs to be waterproof, and at least meter high, otherwise the back and nearby walls will be damp and mildew after a long time;

The hollow part of the pipeline is carefully treated with elastic materials, such as: elastic K11, 3TB3, polyurethane coating, etc.;

Then use crystalline or elastic waterproof paint (such as K11, JS paint) on the bathroom floor and wall, and carefully brush it twice according to the instructions;

Waterproof construction involves experience problems, can find experienced construction personnel to help deal with the best, after the repair is very troublesome, we experience to deal with this kind of problem, will bring you too much trouble!

Be sure not to make waterproof ones that will get moldy.