-
The doorway stone is low, and in this case, the doorway stone should be of an unconventional height. You can't use it at all in that case.
The drainage slope of the floor tiles is too small.
Raise the door stone and raise it on the outside of the door leaf so that the door does not change.
The standard case door leaf is inward-opening.
-
Changing the wooden floor to a rubber floor will do the trick.
-
Made a partition in the bathroom and cured it.
-
When the floor tiles are bulging, it is okay to find the bricks and paste them back, as for the first question, is it possible to install a small shower room?
-
Let's make the bathroom a stepped type.
It may be induced electricity. You should check if the leakage protector is normal, press the test button above, if it still doesn't jump, then it's time to replace the leakage protector early.
Where did it come from? Water heaters, mixing valves, inlet high-pressure hoses, and bath head hoses are all possible, so please explain how you need help.
First of all, it is necessary to determine what the cause of water leakage is, one is the leakage caused by the broken pipe, and the other is the leakage caused by the damage of the waterproof layer and the moisture on the ground. >>>More
You can check if there is a gap in the fixed place under the sliding door, and seal it with glass glue.
There is nothing else, the separate laying of pipes is just to facilitate the installation of equipment, the drainage position is suitable and beautiful, and the drainage in an area will eventually flow into a pipeline and flow into the main pipeline