How high is the wall waterproofing of the bathroom?

The height is determined according to the need, generally speaking, the bathroom is waterproof 180 cm high, and the non-shower wall waterproof coating cannot be less than 35 cm in principle. However, in order to strengthen the waterproof effect, it is recommended to achieve a uniform height of 180 cm. In addition, for the light wall of the toilet and bathroom renovation and the self-built light wall, it is recommended that the waterproof height should be at the top.

Waterproofing paint must be brushed to the millimeter thickness of the national acceptance specification.

Bathroom wall waterproofing Normally, the height of the waterproof layer should reach more than 25cm, and in the shower area, especially the wall where the shower is installed, the waterproof layer should be as much as possible 180cm. In fact, waterproofing, base treatment is very critical, many people just pay attention to the material, the base treatment is not good, no matter how good the material is empty. The base layer should be flat and dense, and the moisture content should not be too high (the specification seems to be less than 8%).

The place of the node (pipeline, flue) is an additional layer, that is, a layer is added locally. In fact, the floor tiles are very effective in finding slopes and joints, and doing a good job of waterproofing.

THE WATERPROOF HEIGHT OF THE BATHROOM IS THE NATIONAL STANDARD STIPULATED BY THE NATIONAL CONSTRUCTION COMMITTEE, AND THE HOUSE HAS BEEN BUILT IN THE BUILDING WATERPROOF, AND THE WATERPROOF LAYER EXTENDS FROM THE GROUND TO THE WALL, 250MM HIGHER THAN THE GROUND. HOWEVER, THE WATERPROOF OF THE WALL IS BASICALLY NOT, ACCORDING TO THE HEIGHT OF THE WATERPROOF LAYER OF THE WALL OF THE CONVENTIONAL BATHROOM BY THE SHOWER HEAD SHALL NOT BE LESS THAN 1800MM, AND THE GENERAL THICKNESS SHALL NOT BE LESS, AND THE WATERPROOF PROJECT MUST BE COMPLETED FOR 24 HOURS WATER STORAGE EXPERIMENT.