-
Anonymous users2024-01-241. Test the temperature by hand first: the first set of heat sinks entering the house, is it hot?
2. Try the set of heat sinks before going out again, is it hot?
3. Measure the temperature with a thermometer in the center of your room, does it reach the temperature promised by the heating company? (e.g. 18 2).
Conclusion: 1. (1) hot, (2) not hot, (3) about 16. It means that the radiator in the room has dissipated the heat ...... of the heat medium entering your roomIt's just that you don't feel too comfortable!
If (3) is below 16, it means that the heating supply of the heating unit is insufficient, and the solution: 1. Require the heating unit to improve the heating parameters (which is actually difficult); 2. Next year, the heating unit is required to increase the pipe diameter of the household supply and return water.
2. (1) not hot, (2)--3) the temperature is not up to standard. Do you want to see if the water supply and return pipes are hot outside? If it's hot, your indoor system is more than blocked!
or if there is a problem with the opening of the valve of the water supply and return water into the household, you can find a heating unit to deal with it;
3. Check whether the outdoor water inlet pipe is hot, if it is not hot, it is the problem of the heating unit, and the heating unit is required to solve the problem.
There are many reasons why the radiator is not hot, such as your installation location, the size of the radiator, the water problem of the boiler, whether the radiator pipeline is blocked, the water pressure problem, whether the pipeline is relatively small, resulting in a small water flow, etc., it is recommended that you find an installation company to see, the system is made by them, it should be able to be solved.
It's probably blocked, find someone to rinse it up.
There are many reasons why the radiator is not hot, such as your installation location, the size of the radiator, the water problem of the boiler, whether the radiator pipeline is blocked, the water pressure problem, whether the pipeline is relatively small, resulting in a small water flow, etc., it is recommended that you find an installation company to see, the system is made by them, it should be able to be solved.
There is a way to deal with this situation, which is caused by the fact that the points are not evenly adjusted, 0 one, you can turn off the heating elsewhere a little. Second, you can also turn on the heating in the living room a little more, so that it will not be cold. You can try it. One.
If this kind of problem occurs, we need to check and repair, and then analyze it according to different reasons. >>>More